Thermal degradation of poly(allyl methacrylate) by mass spectroscopy and TGA

2006-10-01
Vardareli, Tugba Kantav
Keskin, Selda
Usanmaz, Ali
Allyl methacrylate, AMA was polymerized in CCl4 solution by alpha,alpha'-azoisobutyronitrile at 50 degrees C. The thermal degradation mechanism of PAMA was characterized by MS, TGA-FT-IR and FT-IR-ATR methods. The mass spectrum and TGA thermogram showed two stage degradation. The first stage of degradation was mostly linkage type degradation for the fragmentation of pendant allyl groups at 225 - 350 degrees C. In the second stage, at 395 - 515 degrees C, the degradation is random scission and depolymerization types. This was also supported by direct thermal pyrolysis of polymer under vacuum. The degradation fragments of MS and TGA were in agreement. In the degradation process, monomer degraded further to CO, CO2, allyl and ether groups. No strong monomer peak was observed in mass spectrum.
JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY

Suggestions

Synthesis and characterization of conducting graft copolymers based on oligophenols
Sahmetlioglu, Ertugrul; Arikan, Ufuk; Toppare, Levent Kamil; Yuruk, Huseyin; Mart, Hasan (Informa UK Limited, 2006-10-01)
Oligo-2-aminophenol (OAF) was synthesized with oxidative polycondensation of 2-aminophenol and hydrogen peroxide in an aqueous alkaline medium at 80 degrees C. Oligo-2-aminophenol with thiophene side groups (TOAF) was obtained by the reaction of OAF and thiophene-3-acetic acid. Graft copolymers of TOAF and pyrrole were synthesized by electrochemical polymerization in p-toluene sulfonic acid (PTSA)/water medium. Characterization of the graft copolymer (TOAF-g-Py), was carried out by combination of techniques...
Reactive extrusion of poly(ethylene terephthalate)-(ethylene/methyl acrylate/glycidyl methacrylate)-organoclay nanocomposites
Alyamac, Elif; Yılmazer, Ülkü (Wiley, 2007-04-01)
This study was conducted to investigate the effects of component concentrations and addition order of the components on the final properties of ternary nanocomposites composed of poly(ethylene terephthalate), organoclay, and an ethylene-methyl acrylate-glycidyl methacrylate (E-MA-GMA) terpolymer acting as an impact modifier for PET. In this context, first, the optimum amount of the impact modifier was determined by melt compounding binary PET-terpolymer blends in a corotating twin-screw extruder. The amount...
Microwave-assisted simultaneous synthesis of conducting, non-conducting and cross-linked polymers from sodium 2,4,6-tribromophenolate and LiOH
Celik, Gueler Bayrakli; Kisakuerek, Duygu (Informa UK Limited, 2007-01-01)
Poly(dibromophenylene oxide) (P) and conducting polymer (CP) and/or cross-linked polymer (CLP) were synthesized simultaneously from sodium 2,4,6-tribromophenol ate and LiOH by microwave energy in a very short time interval. Polymerizations were carried out (i) under constant microwave energy and constant amount of water with different time intervals ranging from I to 20 min, or (ii) at constant time intervals and constant amount of water with variation of microwave energy ranging from 90 to 900 W, or (iii) ...
Activity-corn position relations in MuCr(2)O(4)-CoCr2O4 solid solutions and stabilities of MnCr2O4 and CoCr2O4 at 1300 degrees C
Koc, N; Timucin, M (Wiley, 2005-09-01)
Phase equilibria in the system MnO-CoO-Cr2O3 were investigated at 1300 degrees C under controlled oxygen partial pressures by using the gas equilibration technique. The CoO activities in various phase assemblages of the system were measured by determining the partial pressures of oxygen in the gas phase for coexistence with metallic cobalt. The activity data revealed that at 1300 degrees C, MnO-CoO and MnCr2O4-CoCr2O4 solid solutions exhibit mild positive departures from ideal behavior. The activities in th...
Poly(ethylene terephthalate)/Carbon Nanotube Composites Prepared With Chemically Treated Carbon Nanotubes
Yesil, Sertan; Bayram, Göknur (Wiley, 2011-07-01)
Surfaces of multiwalled carbon nanotubes (CNT) were functionalized by treatment with strong acid mixture (purification) followed by modification with sodium dodecyl sulfate, poly(ethylene glycol) (PEG), and diglycidyl ether of Bisphenol A (DGEBA). Poly(ethylene terephthalate) (PET)-based conductive polymer composites were prepared by using these CNT by means of melt mixing with a twin screw extruder. Amount of carboxylic acid groups on the CNT surface increased after acid treatment but decreased with surfac...
Citation Formats
T. K. Vardareli, S. Keskin, and A. Usanmaz, “Thermal degradation of poly(allyl methacrylate) by mass spectroscopy and TGA,” JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY, pp. 1569–1581, 2006, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/56675.