Dynamic modeling and analysis of multi-geared rotors including lateral and torsional vibration coupling

Download
014642.pdf
1991
Yılmaz, Durmuş
Show full item record
165
views
0
downloads
https://hdl.handle.net/11511/6358
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Dynamic modelling and control of a gimballed airborne antenna platform with mass unbalance and friction
Şeref, Tuğçe; Leblebicioğlu, Mehmet Kemal; Department of Electrical and Electronics Engineering (2018)
Inertial stabilized gimballed systems are widely-used in many applications to achieve a high precision positioning. Airborne antennas pointing target as a part of the satellite communication may be examples of such systems. This thesis presents the dynamic modelling and control of a two axes gimballed airborne antenna platform. First, reference frames and the transformation matrices are defined to build up the motion of the antenna and kinematic equations of each gimbal are derived. Next, the dynamic equati...
Dynamic modeling and analysis of vibration effects on performance in optical systems
Avşar, Ahmet Levent; Özgüven, Hasan Nevzat; Department of Mechanical Engineering (2008)
In order to understand the effects of structurally induced line of sight (SILOS) jitter (vibration) and to predict its effects on optical system performance, a simple and practical vibratory model and software are developed by using discrete and finite element modeling techniques. For an existing simple optical system, discrete and FE dynamic models are constructed and they are validated by modal tests for the frequency range of interest. In order to find material properties of adhesive, which is used in op...
Dynamic modelling and simulation of a wind turbine
Altuğ, Ayşe Hazal; Yavrucuk, İlkay; Department of Aerospace Engineering (2015)
In this thesis, a dynamic model for a horizontal axis wind turbine is developed for an upwind configuration using the MATLAB/Simulink environment. Blade Element Momentum Theory is used to model the rotor. It is assumed that the rotor blades are rigid and wind speed is uniform. Aerodynamic and gravitational forces are calculated as distributed loads. Verification of the model is done by using the LMS Samtech, Samcef for Wind Turbines software. Aerodynamic properties of the blades, sectional loads and moments...
Dynamic modeling and analysis of spur and helical gears on flekible rotors
Kesan, Mete; Özgüven, Hasan Nevzat; Department of Mechanical Engineering (1992)
DYNAMIC MODELING AND CONTROL OF AN ELECTROMECHANICAL CONTROL ACTUATION SYSTEM
Yerlikaya, Umit; Balkan, Raif Tuna (2017-10-13)
Electromechanical actuators are widely used in miscellaneous applications in engineering such as aircrafts, missiles, etc. due to their momentary overdrive capability, long-term storability, and low quiescent power/low maintenance characteristics. This work focuses on electromechanical control actuation systems (CAS) that are composed of a brushless direct current motor, ball screw, and lever mechanism. In this type of CAS, nonlinearity and asymmetry occur due to the lever mechanism itself, saturation limit...
Citation Formats
D. Yılmaz, “Dynamic modeling and analysis of multi-geared rotors including lateral and torsional vibration coupling,” Middle East Technical University, 1991.
METU IIS - Integrated Information Service open@metu.edu.tr