DESIGN METHOD FOR OPTIMAL DATA-TRANSMISSION FILTERS

Date

1990-03-15

Author

GOKCEK, C
UNVER, Z

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

123
views

0
downloads

Subject Keywords

Electrical and Electronic Engineering

URI

https://hdl.handle.net/11511/65105

Journal

ELECTRONICS LETTERS

DOI

https://doi.org/10.1049/el:19900243

Collections

Department of Electrical and Electronics Engineering, Article

Suggestions

OpenMETU
Core

Optimum Nyquist filters with controlled time and frequency characteristics Tuncer, Temel Engin (Institution of Engineering and Technology (IET), 2002-10-10) A design procedure is presented for pulse shaping filters based on the eigenfilter method. This method presents great flexibility for the control of the tail decay and stopband attenuation of the pulse shaping filters. A variety of optimum filters can be designed which are better than raised cosine filters both in time and frequency.
Hybrid connection of RF MEMS and SMT components in an impedance tuner Unlu, Mehmet; Topalli, Kagan; Atasoy, Halil Ibrahim; Demir, Şimşek; Aydın Çivi, Hatice Özlem; Akın, Tayfun (Elsevier BV, 2010-01-01) This paper presents a systematic construction of a model for a hybrid connected RF MEMS and SMT components in a reconfigurable impedance tuner. The double stub hybrid impedance tuner which employs a high number of MEMS switches is selected to demonstrate the feasibility of the connections. In the hybrid tuner, MEMS switches are actuated with DC bias signals, where SMT resistors de-couple RF from the DC lines. The hybrid tuner is realized in two steps, where the MEMS impedance tuner is fabricated on a glass ...
Active clamped ZVS forward converter with soft-switched synchronous rectifier for high efficiency, low output voltage applications Acik, A; Cadirci, I (Institution of Engineering and Technology (IET), 2003-03-01) The analysis, design, and implementation of an active clamped ZVS forward converter equipped with a soft-switched synchronous rectifier (ACFC-SR), proposed for high-efficiency low output voltage DC-DC converter applications, is presented. The converter efficiency is maximised due to soft switching of the main, active clamp, synchronous rectifier, and freewheeling MOSFET switches. The operating principles of the ACFC-SR are analysed in detail, and the converter performance is compared with that of alternativ...
RIGOROUS ANALYSIS OF FINITE RECTANGULAR ARRAYS WITH SIMULTANEOUS INTEGRAL-EQUATIONS YAVUZ, H; BUYUKDURA, OM (1993-07-02)
Singularity of the magnetic-field integral equation and its extraction Gurel, L; Ergül, Özgür Salih (Institute of Electrical and Electronics Engineers (IEEE), 2005-01-01) In the solution of the magnetic-field integral equation (MFIE) by the method of moments (MOM) on planar triangulations, singularities arise both in the inner integrals on the basis functions and also in the outer integrals on the testing functions. A singularity-extraction method is introduced for the efficient and accurate computation of the outer integrals, similar to the way inner-integral singularities are handled. In addition, various formulations of the MFIE and the electric-field integral equation ar...

Citation Formats

C. GOKCEK and Z. UNVER, “DESIGN METHOD FOR OPTIMAL DATA-TRANSMISSION FILTERS,” ELECTRONICS LETTERS, pp. 373–374, 1990, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/65105.