An 808 microprocessor based proportional integral derivative process controler.

Date

1981

Author

Civandar, M Reha

Metadata

Show full item record

Item Usage Stats

URI

https://hdl.handle.net/11511/6573

Collections

Suggestions

A control oriented 8-bit microcomputer. Emekçioğlu, Salih; Department of Electrical Engineering (1987)
An MC68000-based message handling system Bahçekapılı, Kemal; Aybay, Işık; Department of Electrical and Electronics Engineering (1993)
An astable multivibrator for telemetering. Omurcalı , Savaş; Department of Electrical Engineering (1963)
An in-plane high-sensitivity, low-noise micro-g silicon accelerometer with CMOS readout circuitry Chae, J; Külah, Haluk; Najafi, K (Institute of Electrical and Electronics Engineers (IEEE), 2004-08-01) A high-sensitivity, low-noise in-plane (lateral) capacitive silicon microaccelerometer utilizing a combined surface and bulk micromachining technology is reported. The accelerometer utilizes a 0.5-mm-thick, 2.4 x 1.0 mm(2) proof-mass and high aspect-ratio vertical polysilicon sensing electrodes fabricated using a trench refill process. The electrodes are separated from the proof-mass by a 1.1-mum sensing gap formed using a sacrificial oxide layer. The measured device sensitivity is 5.6 pF/g. A CMOS readout ...
A microcopmputer system based on the 808 a microprocessor. Saner, Ahmet Seçkin; Department of Electrical Engineering (1981)

Citation Formats

M. R. Civandar, “An 808 microprocessor based proportional integral derivative process controler.,” Middle East Technical University, 1981.