An MC68000-based message handling system

Download
1993
Bahçekapılı, Kemal

Suggestions

A TMS 5220 based speech synthesis development system
Gerçek, Alper; Tanık, Yalçın; Department of Electrical and Electronics Engineering (1991)
An 808 microprocessor based proportional integral derivative process controler.
Civandar, M Reha; Department of Electrical Engineering (1981)
A PC-based industrial position control system
Şen, Kemal; Hizal, Mirzahan; Department of Electrical and Electronics Engineering (2000)
An in-plane high-sensitivity, low-noise micro-g silicon accelerometer with CMOS readout circuitry
Chae, J; Külah, Haluk; Najafi, K (Institute of Electrical and Electronics Engineers (IEEE), 2004-08-01)
A high-sensitivity, low-noise in-plane (lateral) capacitive silicon microaccelerometer utilizing a combined surface and bulk micromachining technology is reported. The accelerometer utilizes a 0.5-mm-thick, 2.4 x 1.0 mm(2) proof-mass and high aspect-ratio vertical polysilicon sensing electrodes fabricated using a trench refill process. The electrodes are separated from the proof-mass by a 1.1-mum sensing gap formed using a sacrificial oxide layer. The measured device sensitivity is 5.6 pF/g. A CMOS readout ...
An FPA based BLDC motor control system
Uygur, Serdar; Güran, Hasan Cengiz; Department of Electrical and Electronics Engineering (2012)
In this thesis, position and current control systems for a brushless DC (Direct Current) motor are designed and integrated into one FPGA (Field Programmable Gate Array) chip. Experimental results are obtained by driving the brushless DC motors of Control Actuation System of a guided missile. Because of their high performance, brushless DC motors are widely used in Control Actuation Systems of guided missiles. In order to control the motor torque, current controller is designed and implemented in the FPGA. P...
Citation Formats
K. Bahçekapılı, “An MC68000-based message handling system,” Middle East Technical University, 1993.