The hydraulic jump at an abrupt drop

Download
003661.pdf
1988
Gur, Zerrin
Show full item record
139
views
0
downloads
https://hdl.handle.net/11511/6591
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

The hydraulic jump at an abrupt bottom rise
Ulubayram, Halik; Tokyay, Nuray; Department of Civil Engineering (1989)
The Hydraulic jump at an abrupt enlargement
Albayrak, Tuncay Kaan; Tokyay, Nuray Denli; Department of Civil Engineering (1997)
The rotating elastic-plastic hollow shaft conveying a hot medium
Arslan, E.; Mack, W.; Eraslan, Ahmet Nedim (Springer Science and Business Media LLC, 2010-03-01)
Based on Tresca's yield criterion and the flow rule associated with it, the distribution of stress and strain in a linearly strain hardening elastic-plastic hollow shaft subject to monotonously increasing angular speed and a negative radial temperature gradient-corresponding to the flow of a hot medium-is investigated. Presupposing circular symmetry and plane strain conditions, the problem is amenable to an analytical treatment. It is found that-depending on the temperature difference between the outer and ...
The relay channel with a wire-tapper
Yüksel Turgut, Ayşe Melda; Erkip, Elza (2007-01-01)
In this work a relay channel with a wire-tapper is studied for both discrete memoryless and Gaussian channels. The wire-tapper receives a physically degraded version of the destination's signal. We find inner and outer bounds for the capacity-equivocation rate region. We also argue that when the destination receives a physically degraded version of the relay's signal, inner and outer bounds meet for some special cases.
The effect of a stiffener on a cracked plate under skew-symmetric loading
Yahşi, O.S.; Karakurt, Ali Osman (Elsevier BV, 1988-1)
In this paper, the title problem is studied by using Reissner's transverse shear theory. The main purpose of the paper is to investigate the effect of a stiffener on the stress intensity factors in plates under twisting moments and/or transverse shear loads. The asymptotic stress state near the crack tip terminating at the stiffener is examined, and normalized Mode II and Mode III stress intensity factors are tabulated for various crack geometries. The results also include the effect of Poisson's ratio, sti...
Citation Formats
Z. Gur, “The hydraulic jump at an abrupt drop,” Middle East Technical University, 1988.
METU IIS - Integrated Information Service open@metu.edu.tr