Analysis of lateral-torsional coupled building with base isolation

Download
002837.pdf
1988
Kilic, Irfan Can
Show full item record
54
views
0
downloads
https://hdl.handle.net/11511/6594
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Analysis of blast loading effect on regular steel building structures
Tahmilci, Fatih; Caner, Alp; Department of Civil Engineering (2007)
Concern about effect of explosives effect on engineering structures evolved after the damage of Second World War. Beginning from 90’s with the event of bombing Alfred P. Murrah Federal building located in Oklahoma City this concern deepened and with the attack to World Trade Center twin towers on September 11, 2001 it is peaked. Recent design codes mainly focus on earthquake resistant design and strengthening of the structures. These code design methodologies may sometimes satisfy current blast resistant de...
Analysis of internal explosion and structural response to blast loading
Turcan, Uğur Can; Ulaş, Abdullah; Serin, Nadir; Department of Mechanical Engineering (2012)
In this thesis, blast overpressure due to internal explosion and dynamic response to this loading of the structure is analyzed. Firstly, theoretical backgrounds of computational procedures are presented. The basic principles of the hydrocodes and semi empirical methods are explained in detail. In the analysis of blast overpressure, partially vented structures are examined. Three different venting areas and three different charge weights are employed in the study. Peak pressure, time and impulse parameters a...
Analysis of slot coupled microstrip patch antennas
Ballıkaya, Elif; Aydın Çivi, Hatice Özlem; Department of Electrical and Electronics Engineering (2007)
Method of Moments (MoM)/Green’s function formulation is developed for the analysis of electromagnetic radiation from planar rectangular microstrip antennas with different feeding techniques. Investigated structures are microstrip line fed patch antenna, proximity coupled patch antenna and slot coupled patch antenna. For all these structures equivalent problems are defined. Then, integral equations where currents are the unknowns are obtained from boundary conditions and by using spectral domain representati...
Analysis of forced acoustic fields inside structurally coupled cavities
Sorguç, Arzu (null; 1992-03-01)
Analysis of specimen size effects in inclined compression test on laminated elastomeric bearings
Topkaya, Cem (Elsevier BV, 2004-07-01)
Inclined compression test method is a practical way of determining the shear modulus of full-size laminated elastomeric bearings. Performing full-size bearing tests requires high-capacity testing machines. It may be possible to cut the specimens into smaller sizes for testing purposes. Limited amount of experimental data show that specimen size has a significant effect on the measured shear modulus. In this paper, the Haringx shear weak column theory is used to identify the important geometric specimen prop...
Citation Formats
I. C. Kilic, “Analysis of lateral-torsional coupled building with base isolation,” Middle East Technical University, 1988.
METU IIS - Integrated Information Service open@metu.edu.tr