Analysis of stresses in the in situ wedge shear test samples by the finite element method

Koseoğlu, Rüstu


Analysis of stresses in spur gears by the photoelastic coating method
Celik, M; Bilir, OG (1999-07-01)
This study uses a photoelastic coating method in spur gear stress analysis, and verifications of the results are made with two-dimensional boundary element analysis. The principal advantage of the photoelastic coating method comes from the fact that it is a full-field technique capable of showing the entire stress distribution over the surface of a part and thus highlighting the regions where the stresses are the largest. The general results of experimental work in which spur gears are analyzed, both in tes...
Analysis of the radiation from aparture/printed antennas in the presence of periodic structures through numerical and asymptotic techniques
Manara, Giuliano; Aydın Çivi, Hatice Özlem; Nepa, Paolo; Çetin, Ramazan(2010)
Proje kapsamında, yakınında saçıcıların bulunduğu elektriksel olarak büyük anten dizilerinin ışıma/saçınma problemini etkin bir şekilde analiz etmek için bir yöntem geliştirmek üzere çalışmalar yapılmıştır. Bu yöntem elektriksel olarak büyük dizilerin asimptotik ışın alan gösterimine ve dizi akımlarının Ayrık Fourier Dönüşüm ifadelerine dayanmaktadır. Gerçekçi anten dizilerinin üzerindeki akım dağılımının Ayrık Fourier Dönüşümünün, dizinin yakınında saçınmaya yol açabilecek nesneler olduğu durumda bile, bel...
BULUTAY, C; PRASAD, S (1993-06-01)
Three-dimensional condensed asymmetrical node, variable grid, transmission-line matrix (TLM) method has been used in analyzing several millimeter waveguides on anisotropic substrates. The dispersion characteristics of image guides together with field and energy confinement properties at millimeter-wave frequencies have been investigated. Edge coupled microstrip line on a uniaxial substrate is analyzed for the even and odd mode dispersion characteristics. Finally the same analysis is repeated for bilateral f...
Analysis of unsteady airfoil interference effects using a zonal Navier-Stokes solver
Tuncer, İsmail Hakkı (null; 1995-01-01)
© 1995, by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved.Unsteady aerodynamic interference effects and thrust generation on a flapping/stationary airfoil combination in tandem are studied parametrically. A zonal Navier-Stokes solver is employed to compute the unsteady flowfield. The computational domain is discretized with overlapping uniform grids generated around each airfoil. The thrust generation and the propulsive efficiency of the flapping/stationary airfoil combinat...
Analysis of the dielectric-rod antennas using the method of effective dielectric constants
Çetinbaş Uçak, Selda; Dural, Gülbin; Department of Electrical and Electronics Engineering (1998)
Citation Formats
R. Koseoğlu, “Analysis of stresses in the in situ wedge shear test samples by the finite element method,” Middle East Technical University, 1988.