PREPARATION OF BLOCK-COPOLYMERS WITH MACROAZONITRILES AS THE INITIATOR

Date

1993-12-01

Author

YURUK, H
ULUPINAR, S

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

258
views

0
downloads

Block copolymers containing poly(ethylene oxide) or poly(propylene oxide) prepolymer segments and methyl methacrylate were prepared. A stepwise procedure was first employed to prepare macro-azocarbamates by capping hydroxy-terminated poly(ethylene oxide) or poly(propylene oxide) with 3-isocyanatomethyl-3,5,5-trimethylcyclohexyl isocyanate and subsequently reacting this intermediate with 4,4'-azobis(4-cyano-n-pentanol)**. The resulting polymeric azocarbamates were used as free-radical initiators for the polymerization of methyl methacrylate. Various modes of preparation and the properties of the copolymers are described. Formation of block copolymers is illustrated by several analyses and measurements of elastic modulus versus temperature.

Subject Keywords

General Materials Science

URI

https://hdl.handle.net/11511/65984

Journal

ANGEWANDTE MAKROMOLEKULARE CHEMIE

DOI

https://doi.org/10.1002/apmc.1993.052130117

Collections

Department of Chemistry, Article

Suggestions

OpenMETU
Core

Synthesis of copolymers of methoxy polyethylene glycol acrylate and 2-acrylamido-2-methyl-1-propanesulfonic acid: Its characterization and application as superplasticizer in concrete Buyukyagci, Arzu; Tuzcu, Goezde; Aras, Leyla (Elsevier BV, 2009-07-01) Water-soluble copolymers of methoxy polyethylene glycol acrylate (mPEGA) and 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) were synthesized by free radicalic polymerization and evaluated as slump-retaining dispersant for cement particles. The slump-retaining effect of the synthesized copolymers was studied in terms of reaction pH, composition, and molecular weight of mPEG side chains. mPEG grafted copolymers (mPEGA-co-AMPS) were characterized by FTIR, H-1 NMR. In this study, dilute solution viscometry...
AN EXPERIMENTAL INVESTIGATION OF POLYVINYL-CHLORIDE) EMULSION POLYMERIZATION - EFFECT OF INITIATOR AND EMULSIFIER CONCENTRATIONS ON POLYMERIZATION KINETICS AND PRODUCT PARTICLE-SIZE Karakaş, Gürkan (Wiley, 1989-01-01) Effects of concentration changes in initiator species Na2SO3, (NH4)2S2O8 and CuSO4, and emulsifier, ammonium stearate, on poly(vinyl chloride) (PVC) emulsion polymerization kinetics and on product particle size were experimentally investigated. It was observed that to obtain industrially significant rates and overall conversions, not only an optimum concentration ratio of Na2SO3/(NH4)2S2O8/CuSO 4 must be used, but also the concentrations of these species must be above certain limits. Increasing the concentr...
Synthesis of conducting copolymers of thiophene capped poly(ethylene oxide) with pyrrole and thiophene Yildiz, Huseyin Bekir; Kiralp, Senem; Toppare, Levent Kamil; Yagci, Yusuf; Ito, Koichi (Elsevier BV, 2006-11-10) Thiophene capped poly(ethylene oxide) (PEO) was synthesized. Copolymerisations of PEO with pyrrole (Py) and thiophene (Th) were achieved in water-sodium dodecyl sulfate (SDS) and acetonitrile (AN)-tetrabutylammonium tetrafluoroborate (TBAFB) solvent electrolyte couples via constant potential electrolyses. Characterisations of the samples were performed by NMR, cyclic voltammetry (CV), FT-IR, scanning electron microscopy (SEM). Electrical conductivities were measured by the four-probe technique. PEO-co-PTh f...
Synthesis, crystal structure and characterization of new transition metal compounds of bromophenols: Bis(2,4,6-tribromophenolato) di(N-methylimidazole)M(II) (M=Co, Cu) Camurlu, P; Yılmaz, Ayşen; Tatar, L; Kisakurek, D; Ulku, D (Wiley, 2005-03-01) Bis(2,4,6-tribromophenolato)di(N-methyl imidazole)M(II), where M stands for cobalt and copper metals, was synthesized via reaction of the corresponding metal sulphate and 2,4,6-tribromophenolate in aqueous media in the presence of N-methyl imidazole and sodium hydroxide. Although various crystallization procedures were applied only cobalt complex was obtained as single crystals. The Co(II) ion has a distorted octahedral enviroment involving two O atoms and two N atoms of the Bis(2,4,6-tribromopbenolato)di(N...
Effect of Magnesium and Osteoblast Cell Presence on Hydroxyapatite Formation on (Ti,Mg)N Thin Film Coatings Onder, Sakip; Calikoglu-Koyuncu, Ayse Ceren; Kose, Gamze Torun; Kazmanli, Kursat; Kök, Fatma Neşe; Urgen, Mustafa (Springer Science and Business Media LLC, 2017-07-01) TiN and (Ti,Mg)N thin film coatings were deposited on Ti substrates by an arc-physical vapor deposition technique. The effect of cell presence on hydroxyapatite (HA) formation was investigated using surfaces with four different Mg contents (0, 8.1, 11.31, and 28.49 at.%). Accelerated corrosion above 10 at.% Mg had a negative effect on the performance in terms of both cell proliferation and mineralization. In the absence of cells, Mg-free TiN coatings and low-Mg (8.1 at.%)-doped (Ti,Mg)N surfaces led to an e...

Citation Formats

H. YURUK and S. ULUPINAR, “PREPARATION OF BLOCK-COPOLYMERS WITH MACROAZONITRILES AS THE INITIATOR,” ANGEWANDTE MAKROMOLEKULARE CHEMIE, pp. 197–206, 1993, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/65984.