THERMAL POLYMERIZATION OF BIS(TRIHALOPHENOXO)COPPER(II) COMPLEXES IN EXCESS DIMETHYLFORMAMIDE AND DIMETHYL-SULFOXIDE AS LIGANDS

1989-08-01
KISAKUREK, D
SANLI, O
Thermal decomposition of bis(trihalophenoxo)copper(II) complexes was achieved at 50°C in dimethylformamide or dimethyl sulfoxide. The resulting polymers, poly(oxydihalophenylene)s (2), were characterized by FTIR, 1H NMR and 13C NMR spectroscopy and by differential scanning calorimetry. The molecular weights were determined by the vapour pressure method. Tribrominated phenol derivatives prefer 1,4‐substitution, whereas with trichlorophenol derivatives 1,2‐and 1,4‐substitutions take place at equal rates in either solvent.
MAKROMOLEKULARE CHEMIE-MACROMOLECULAR CHEMISTRY AND PHYSICS

Suggestions

Impact modified polyamide-organoclay nanocomposites
Işık, Işıl; Yılmazer, Ülkü; Department of Chemical Engineering (2007)
The effects of melt state compounding and addition order of ethylene-butyl acrylate-maleic anhydride (E-BA-MAH), ethylene-glycidyl methacrylate (E-GMA), ethylene-methyl acrylate-glycidyl methacrylate (E-MA-GMA) terpolymer and/or three types of organoclays (Cloisite® 15A, 25A and 30B) on morphology, thermal, mechanical and dynamic mechanical properties of polyamide-6 are investigated. XRD patterns show that the interlayer spacing for Cloisite® 15A remained unchanged; however it increased for the organoclays ...
Electrochemical synthesis of crowned conducting polymers : nature of radical cations in polymerization and mechanism of conductivity
Cihaner, Atilla; Önal, Ahmet Muhtar; Department of Chemistry (2004)
Poly(dibenzo-18-crown-6) (Poly(DB18C6)) was synthesized by electrochemical oxidation of dibenzo-18-crown-6 (DB18C6) using a mixture of acetonitrile and dichloromethane as solvent and tetrabutylammonium tetrafluoroborate (TBABF4) or tetrabutylammonium hexafluorophosphate (TBAPF6) as supporting electrolyte. The anodic polymerization of DB18C6 was investigated using in-situ ESR and in-situ UV-VIS spectroscopic techniques. Spectroelectrochemical (SPEL) properties and thermal analysis of the resulting polymers h...
Nanocomposites based on blends of polyethylene
Işık, Fatma; Yılmazer, Ülkü; Department of Chemical Engineering (2005)
In this study the effects of compatibilizer type, organoclay type, and the addition order of components on the morphological, thermal, mechanical and flow properties of ternary nanocomposites based on low density polyethylene, LDPE were investigated. As compatibilizer, ethylene/methyl acrylate/glycidyl methacrylate, ethylene/glycidyl methacrylate, and ethylene/butyl acrylate/maleic anhydride; as organoclay Cloisite? 15A, Cloisite? 25A and Cloisite? 30B were used. All samples were prepared by a co-rotating t...
Further experimental considerations on poly(dihalophenylene oxide)
Türker, Lemi; Kısakürek, Duygu (Wiley, 1989)
The decomposition of copper(II) 2,6‐dibromo‐4‐chlorophenoxide in acetonitrile yields poly(dihalophenylene oxide). 1H NMR study revealed that 1,4‐catenation was favoured over 1,2‐catenation, leading to higher linearity in the structure.
Pyrolysis mass spectrometric analysis of copolymer of polyacrylonitrile and polythiophene
Oğuz, Gülcan; Hacaloğlu, Jale; Department of Polymer Science and Technology (2004)
In the first part of this work, the structural and thermal characteristics of polyacrylonitrile, polyacrylonitrile films treated under the electrolysis conditions in the absence of thiophene, polythiophene and the mechanical mixture and a conducting copolymer of polyacrylonitrile/polythiophene have been studied by pyrolysis mass spectrometry technique. The thermal degradation of polyacrylonitrile occurs in three steps; evolution of HCN, monomer, low molecular weight oligomers due to random chain cleavages a...
Citation Formats
D. KISAKUREK and O. SANLI, “THERMAL POLYMERIZATION OF BIS(TRIHALOPHENOXO)COPPER(II) COMPLEXES IN EXCESS DIMETHYLFORMAMIDE AND DIMETHYL-SULFOXIDE AS LIGANDS,” MAKROMOLEKULARE CHEMIE-MACROMOLECULAR CHEMISTRY AND PHYSICS, pp. 1843–1853, 1989, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/66011.