Turbulent Combustion Modeling with Fully Coupled Fully Implicit Compressible Solver

Date

2014-09-28

Author

Kalpakli, B.
Ozturkmen, M. O.
Akmandor, I. S.

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

155
views

0
downloads

The aim of this paper is to report on a recently developed fully coupled and fully implicit solver for turbulent combustion. All the equationsare written in terms of primitive variables (pressure, velocity, temperature, turbulent parameters and species mass fractions) and solved in a fully coupled manner. The coupled system of equations is solved using an unstructured collocated Finite Volume (FV) approach using a fully implicit temporal discretization. An all speed version of AUSM approach is used along with a time derivative preconditioning. The developed fully coupled solver can be applied to a wide range of flow speeds from incompressible limit to hyper-sonic regimes. For solving the resulting system of equations, a sparse ILU preconditioned, sparse GMRES solver is used. This sparse matrix solver is very effective and only linearly increases the computational cost with increasing number of solution cells and number of solution variables. Turbulence reaction coupling is basically obtained using Eddy Dissipation Model (EDM) approach.

Subject Keywords

Numerical simulation, Numerical solution of equations, Fluid dynamics, Finite volume methods

URI

https://hdl.handle.net/11511/66854

DOI

https://doi.org/10.1063/1.4912355

Collections

Department of Aerospace Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Vortex generator design for subsonic inlets Nasuhbeyoğlu, Batuhan; Albayrak, Kahraman; Department of Mechanical Engineering (2014) In this thesis, numerical investigation of the benefits of vortex generators control on the performance of S-shaped inlets has been performed. This study is divided into two main parts. In the first part, a diffusive S-shaped inlet is examined and the numerical analyses results are compared with the experimental results. Three-dimensional Navier-Stokes equations are solved and three different turbulence models which are Realizable k-ε, Standard k-ω, and Spalart-Allmaras methods are used. Distortion coeffici...
Design Optimization in Non-equilibrium Reacting Flows Eyi, Sinan; Yumusak, Mine (2010-07-16) The objective of this study is to develop a reliable and efficient design tool that can be used in chemically reacting flows. The flow analysis is based on axisymmetric Euler and the finite rate reaction equations. These coupled equations are solved by using Newton's method. Both numerical and analytical methods are used to calculate Jacobian matrices. Sensitivities are evaluated by using adjoint method. The performance of the optimization method is demonstrated for a rocket motor nozzle design.
Parallel, navier-stokes computation of the flowfield of a hovering helicopter rotor Geçgel, Murat; Özyörük, Yusuf; Department of Aerospace Engineering (2003) The aim of this study is to extend a parallel Fortran90 code to compute three6dimensional laminar and turbulent flowfields over rotary wing configurations. The code employs finite volume discretization and the compact, four step Runge-Kutta type time integration technique to solve unsteady, thin6layer Navier6Stokes equations. Zero6order Baldwin6Lomax turbulence model is utilized to model the turbulence for the computation of turbulent flowfields. A fine, viscous, H type structured grid is employed in the co...
Numerical modeling of general compressible multi-phase flows Kalpaklı, Bora; Tarman, Işık Hakan; Özyörük, Yusuf; Department of Engineering Sciences (2013) In this thesis, some novel methods for solution of compressible, multi-phase flows on unstructured grids were developed. The developed methods are especially advantageous for interface problems, while they are also applicable to multi-phase flows containing mixtures as well as particle suspensions. The first method studied was a multi-dimensional, multi-phase Godunov method for compressible multi-phase flows. This method is based on the solution of a hyperbolic equation system for compressible multi-phase f...
Technological characteristics of abrick masonry structure and their relationship with the structural behaviour / Aktaş, Yasemin Didem; Türer, Ahmet; Department of Archaeometry (2006) The aim of this study is to investigate the physical and mechanical properties of construction materials in relation with the structural behaviour of a historic structure. Within this framework, the brick masonry superstructure of Tahir ile Zuhre Mescidi, a XIIIth century Seljuk monument in Konya was selected as case study. The study started with the determination of the basic physical (bulk density, effective porosity, water absorption capacity), mechanical (modulus of elasticity, uniaxial compressive stre...

Citation Formats

B. Kalpakli, M. O. Ozturkmen, and I. S. Akmandor, “Turbulent Combustion Modeling with Fully Coupled Fully Implicit Compressible Solver,” 2014, vol. 1648, p. 0, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/66854.