Show/Hide Menu
Hide/Show Apps
Logout
Türkçe
Türkçe
Search
Search
Login
Login
OpenMETU
OpenMETU
About
About
Open Science Policy
Open Science Policy
Open Access Guideline
Open Access Guideline
Postgraduate Thesis Guideline
Postgraduate Thesis Guideline
Communities & Collections
Communities & Collections
Help
Help
Frequently Asked Questions
Frequently Asked Questions
Guides
Guides
Thesis submission
Thesis submission
MS without thesis term project submission
MS without thesis term project submission
Publication submission with DOI
Publication submission with DOI
Publication submission
Publication submission
Supporting Information
Supporting Information
General Information
General Information
Copyright, Embargo and License
Copyright, Embargo and License
Contact us
Contact us
A computer solution of Muskat's method for predicting perfomance of an internal gas drive reservoir.
Date
1972
Author
Bozyiğit, Müslüm
Metadata
Show full item record
Item Usage Stats
130
views
0
downloads
Cite This
URI
https://hdl.handle.net/11511/6928
Collections
Graduate School of Natural and Applied Sciences, Thesis
Suggestions
OpenMETU
Core
A numerical method for predicting depth of heat affected zone in EDM process for AISI H13 tool steel
Shabgard, M. R.; Seyedzavvar, M.; Oliaei, S. Nadimi Bavil; Ivanov, A. (2011-07-01)
This study presents a finite element model (FEM) to model temperature distribution for AISI H13 tool steel workpiece in electrical discharge machining (EDM) at different machining parameters (pulse current, pulse on-time, temperature-sensitive material properties, size of heat source, and material flushing efficiency). Scanning electron microscopy (SEM) with energy dispersive x-ray (EDX) and micro-hardness tests were used to validate accuracy of FEM predictions. Increasing pulse on-time leads to a higher de...
A two-energy equation model for dynamic heat and mass transfer in an adsorbent bed using silica gel/water pair
Solmus, Ismail; Rees, D. Andrew S.; Yamali, Cemil; Baker, Derek Keıth (2012-09-01)
In this study, the influence of the adsorbent bed dimensions, convective heat transfer coefficient between the cooling fluid and adsorbent bed and the thermal conductivity of the solid adsorbent material on the transient distributions of the solid and gas phase temperature difference, differences in the adsorbate concentration predicted by the instantaneous equilibrium and linear driving force (LDF) models, solid phase temperature, gas pressure and adsorbate concentration inside the adsorbent bed of a solid...
A method for wafer level hermetic packaging of SOI-MEMS devices with embedded vertical feedthroughs using advanced MEMS process
Torunbalci, Mustafa Mert; Alper, Said Emre; Akın, Tayfun (IOP Publishing, 2015-12-01)
This paper presents a novel, inherently simple, and low-cost fabrication and hermetic packaging method developed for SOI-MEMS devices, where a single SOI wafer is used for the fabrication of MEMS structures as well as vertical feedthroughs, while a single glass cap wafer is used for hermetic encapsulation and routing metallization. Hermetic encapsulation can be achieved either with the silicon-glass anodic or Au-Si eutectic bonding techniques. The dies sealed with anodic and Au-Si eutectic bonding provide a...
A Mechanistic Model for Predicting Frictional Pressure Losses for Newtonian Fluids in Concentric Annulus
SORGUN, MEHMET; Ozbayoglu, M. E. (Informa UK Limited, 2010-01-01)
A mathematical model is introduced estimating the frictional pressure losses of Newtonian fluids flowing through a concentric annulus. A computer code is developed for the proposed model. Also, extensive experiments with water have been conducted at Middle East Technical University, Petroleum and Natural Gas Engineering Department Flow Loop and recorded pressure drop within the test section for various flow rates. The performance of the proposed model is compared with computational fluid dynamics (CFD) soft...
A computational tool for wind wave prediction based on CEM method
Emrecan, Polat; Yalçıner, Ahmet Cevdet; Baykal, Cüneyt; Department of Civil Engineering (2022-5-11)
In this study, a computational tool is presented for the wind wave prediction based on the CEM Method. The method is given for the computation of storm-averaged wind wave characteristics. The computational tool utilizes the hourly average wind speed and direction and the effective fetch data for a geographical location to compute the hourly significant wave height and period and the mean direction. In the study, the main focus is given on identifying the individual storms and the individual storm durations ...
Citation Formats
IEEE
ACM
APA
CHICAGO
MLA
BibTeX
M. Bozyiğit, “A computer solution of Muskat’s method for predicting perfomance of an internal gas drive reservoir.,” Middle East Technical University, 1972.