Buoyancy effects on turbulent forced convection heat transfer in vertical tubes-upward flow of water.

Date

1981

Author

Uzunoglu, Erhan

Metadata

Show full item record

Item Usage Stats

107
views

0
downloads

URI

https://hdl.handle.net/11511/7785

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Buoyancy effects on forced convection in upward flow of water , constant wall temperature boundary condition Çakırsoy, Nedret Şerif; Oskay, Rüknettin; Department of Mechanical Engineering (1995)
COMPRESSIBLE, HYPERELASTIC, SPINNING TUBES SUBJECTED TO RADIAL PRESSURE ERTEPINAR, A (1991-01-01) The theory of finite elasticity is used to investigate the behaviour of cylindrical tubes made of compressible, hyperelastic materials and subjected to the simultaneous action of spin and radial tractions on the outer curved surface while the inner curved surface is perfectly bonded to a rigid shaft. The second order quasi-linear ordinary differential equation governing the system is solved numerically by the method of adjoints. The effects of the material compressibility, the second strain invariant depe...
Streamwise oscillations of a cylinder beneath a free surface: Free surface effects on vortex formation modes Bozkaya, Canan; Mironova, L. A.; Gubanov, O. I. (Elsevier BV, 2011-06-15) A computational study of a viscous incompressible two-fluid model with an oscillating cylinder is investigated at a Reynolds number of 200 and at a dimensionless displacement amplitude of A = 0.13 and for the dimensionless forcing cylinder oscillation frequency-to-natural vortex shedding frequency ratios, f/f(0) = 1.5, 2.5, 3.5. Specifically, two-dimensional flow past a circular cylinder subject to forced in-line oscillations beneath a free surface is considered. The method is based on a finite volume discr...
ATTITUDE CONTROL OF MULTIPLE RIGID BODY SPACECRAFT WITH FLEXIBLE HINGE JOINTS Akbulut, Burak; Özgören, Mustafa Kemal; Tekinalp, Ozan (2010-02-18) Control algorithm is developed for a satellite with flexible appendages to achieve a good pointing performance. Detailed modeling activity was carried out that consists of sensor and actuator models, disturbances and system dynamics. Common hardware found in the spacecraft such as reaction wheels, gyroscopes, star trackers etc. were included in the model. Furthermore, the Newton-Euler method is employed for the derivation of multi-body equations of motion. Proper metrics such as accuracy, jitter and stabili...
Attitude control of multiple rigid body spacecraft with flexible hinge joints Akbulut, Burak; Özgören, Mustafa Kemal; Department of Mechanical Engineering (2009) Control algorithm is developed for a satellite with flexible appendages to achieve a good pointing performance. Detailed modeling activity was carried out that consists of sensor and actuator models, disturbances and system dynamics. Common hardware found in the spacecraft such as reaction wheels, gyroscopes, star trackers etc. were included in the model. Furthermore, the Newton-Euler method is employed for the derivation of multi-body equations of motion. Evaluation of the pointing accuracy with proper poi...

Citation Formats

E. Uzunoglu, “Buoyancy effects on turbulent forced convection heat transfer in vertical tubes-upward flow of water.,” Middle East Technical University, 1981.