Doping of layered Li(NixMnyCo1−x−y-zMz)O2 (z=Ag,Cu) cathode materials for lithium ion batteries

Date

2017-11-26

Author

Pişkin, Berke
Savas Uygur, Cansu
Aydınol, Mehmet Kadri

Metadata

Show full item record

Item Usage Stats

68
views

0
downloads

URI

https://hdl.handle.net/11511/80867

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Doping of layered Li(NixMnyCo1?x?y-zMz)O2 (z=W,Mo) cathode materials for lithium ion batteries Pişkin, Berke; Savas Uygur, Cansu; Aydınol, Mehmet Kadri (2017-09-26)
DOPING AND BAND-GAP ENGINEERING OF AN INTRAZEOLITE TUNGSTEN(VI) OXIDE SUPRALATTICE OZIN, GA; MALEK, A; PROKOPOWICZ, R; MACDONALD, PM; Özkar, Saim; MOLLER, K; BEIN, T (1991-01-01) New results are presented concerning the topotactic self-assembly, n-type doping and band-gap engineering of an intrazeolite tungsten(VI) oxide supralattice n(WO3)-Na56Y, where O < n ≤ 32, built-up of single size and shape (WO3)2 dimers. In particular it has been found that the oxygen content of these dimers can be quantitatively adjusted by means of a thermal vacuum induced reversible reductive-elimination oxidative-addition of dioxygen. This provides access to new n(WO3−x)−Na56Y materials (0 < x ≤ 1.0) in...
Coating of iron oxide pellets for direct reduction Basdag, A; Arol, Ali İhsan (2002-06-01) Depending upon their chemical composition and, to a lesser extent, on their physical properties, iron oxide pellets exhibit varying degrees of sticking tendency during direct reduction at elevated temperatures. For an efficient shaft furnace operation in direct reduction (DR), it is imperative to prevent pellets from sticking to each other and, hence, forming clusters. Coating of pellets with a suitable inorganic material has increasingly been gaining recognition amongst the pellet producers and DR plant op...
Conducting polymer composites of polypyrrole and polyindene Bozkurt, A; Akbulut, Ural; Toppare, Levent Kamil (1996-08-30) Polypyrrole-polyindene composites were prepared via electrochemical methods. Two different approaches were utilized. In the first, the electro-initiated polymerization of indene on a platinum electrode was achieved at 2.0 V versus Ag/Ag+ in acetonitrile. Then the polyindene-coated electrode was used for the electrochemical polymerization of pyrrole at 1.0 V versus Ag/Ag+. In the second case, electrochemical coating of platinum electrode with polypyrrole at 1.0 V versus Ag/Ag+ was carried out and indene was ...
Corrosion of N-80 steel in an environment containing sulphate-Reducing bacteria Javaherdashti, Reza; Sarıoğlu, Filiz; Department of Metallurgical Engineering (1993)

Citation Formats

B. Pişkin, C. Savas Uygur, and M. K. Aydınol, “Doping of layered Li(NixMnyCo1−x−y-zMz)O2 (z=Ag,Cu) cathode materials for lithium ion batteries,” 2017, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/80867.