Investigation of Static and Fatigue Failure Mechanisms on UD and Woven Curved Composite Laminates

Date

2018-12-01

Author

Çöker, Demirkan

Metadata

Show full item record

Item Usage Stats

123
views

0
downloads

URI

https://hdl.handle.net/11511/81705

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Investigation of fracture behavior of steel/steel laminates Şimşir, Mehmet; Öztürk, Tayfur; Department of Metallurgical and Materials Engineering (2004) A study is carried out into fracture behavior of steel/steel laminates both experimentally and through finite element analysis (FEM). The laminates produced by hot pressing consisted of low carbon and medium carbon steels with two volume fractions; 0.41 and 0.81. Fracture toughness, JIC has been measured using partial unloading technique assuming a critical value of crack extension. The technique is initially applied to monolithic material and then to the laminates in crack divider orientation. Evaluation o...
Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings Yılmaz, Olgun; Karakaya, İshak (2018-03-15) Addition of inert ceramic particles improves the mechanical and tribological properties of nickel coatings significantly. Two different surfactants; ammonium lignosulfonate (ALS) and sodium dodecyl sulfate (SDS), were used in a typical sulfamate nickel plating solution in varying concentrations to arrange the floatation and wetting conditions of Al2O3 particles (~300 nm) in the electrolyte. In addition to the effect of surfactants, effects of current density and...
Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings Yılmaz, Olgun; Erdoğan, Metehan; Karakaya, İshak (2018-02-01)
Investigation of the Mechanical Properties of Al2O3 Reinforced Nickel Composite Coatings Yılmaz, Olgun; Karakaya, İshak (2018-03-15) Addition of inert ceramic particles improves the mechanical and tribological properties of nickel coatings significantly. Two different surfactants; ammonium lignosulfonate (ALS) and sodium dodecyl sulfate (SDS), were used in a typical sulfamate nickel plating solution in varying concentrations to arrange the floatation and wetting conditions of Al2O3 particles (~300 nm) in the electrolyte. In addition to the effect of surfactants, effects of current density and...
Investigation of Prenucleation Clustering in Al RE Marginal Glass Forming Alloys Ovun, Mert; Kutsal, Mustafacan; Kramer, Matthew; Kalay, Yunus Eren (null; 2015-07-13)

Citation Formats

D. Çöker, “Investigation of Static and Fatigue Failure Mechanisms on UD and Woven Curved Composite Laminates,” 2018, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/81705.