Investigation of Prenucleation Clustering in Al RE Marginal Glass Forming Alloys

Ovun, Mert
Kutsal, Mustafacan
Kramer, Matthew
Kalay, Yunus Eren


Investigation of Medium Range Correlations in Marginal GlassForming Alloys
Kutsal, Mustafacan; Ott, Ryan; Kramer, Matthew; Kalay, Yunus Eren (null; 2016-02-14)
Investigation of Static and Fatigue Failure Mechanisms on UD and Woven Curved Composite Laminates
Çöker, Demirkan (null; 2018-12-01)
Investigation of crack growth along curved interfaces in L-shaped composite and polymers
Yavas, D.; Gozluklu, B.; Çöker, Demirkan (2014-01-01)
Delamination in unidirectional L-shaped composite laminates is modeled with two L-shaped polycarbonate plates bonded to each other where the effect of pre-crack length on the stability of the crack growth is investigated experimentally and computationally. In the experimental study, a unique testing fixture with a sliding platform is designed to create a pure vertical displacement to one of the arms. The full-field technique of photoelasticity is used in order to visualize isochromatic fringe pattern around...
Investigation of microstructure inhomogeneity in SiCp-reinforced aluminum matrix composites
Gacsi, Zoltan; Gür, Cemil Hakan; Makszimus, Andrea; Pieczonka, Tadeusz (2007-01-01)
The type, volume fraction, size, shape and arrangement of embedded particles influence the mechanical properties of the particle reinforced metal matrix composites. This presents the investigation of the SiC particle and porosity distributions in various aluminum matrix composites produced by cold- and hot-pressing. The inicrostructures were characterized by optical microscopy and stereological parameters. SiC and porosity volume fractions, and the anisotropy distribution function were measured to establish...
Investigation of microstructure-ultrasonic velocity relationship in SiCp-reinforced aluminium metal matrix composites
Gür, Cemil Hakan (Elsevier BV, 2003-11-25)
Twenty-one sets of specimens were fabricated by hot pressing powder mixtures containing various volume and size combinations of pure Al and SiC particles. Neither heat treatment nor secondary deformation processes were applied. The microstructures of the specimens were characterised by optical and scanning electron microscopy. Using a 10 MHz probe, the velocity of ultrasonic longitudinal waves was measured. The results show that in general the ultrasonic velocity increases with an increase in SiC content. H...
Citation Formats
M. Ovun, M. Kutsal, M. Kramer, and Y. E. Kalay, “Investigation of Prenucleation Clustering in Al RE Marginal Glass Forming Alloys,” 2015, Accessed: 00, 2021. [Online]. Available: