NUMERICAL AND EXPERIMENTAL ANALYSIS OF FLAPPING MOTION IN HOVER. APPLICATION TO MICRO AIR VEHICLES.

2005-06-01
The aerodynamics phenomena of flapping motion in hover are considered in view of the future Micro Air Vehicle applications. The aim of this work is to characterize the vortex dynamics generated by the wing in motion using direct numerical simulation and experimental analysis then to propose a simplified analytical model for prediction of the forces in order to optimize the parameters of the motion leading to maximum force. A great number of cases are investigated corresponding to different angles of attack, location of start of change of incidence, location of start of change of velocity, axis of rotation, and Re number. The airfoil used is symmetrical. The flow is assumed to be incompressible and laminar with the Reynolds numbers between 500 and 2000. The experimental results obtained by the laser sheet visualization and the Particle Image Velocimetry (PIV) techniques are used in parallel with the direct numerical simulation results for the phenomenological analysis of the flow. The model developed for the aerodynamic forces is an indicial iv method based on the use of the Duhamel Integral and the results obtained by this model are compared with the ones of the numerical simulations.

Suggestions

Numerical and experimantal analysis of flapping motion in hover, application to micro air vehicles
Kurtuluş, Dilek Funda; Alemdaroğlu, Hüseyin Nafiz; Department of Aerospace Engineering (2005)
The aerodynamics phenomena of flapping motion in hover are considered in view of the future Micro Air Vehicle applications. The aim of this work is to characterize the vortex dynamics generated by the wing in motion using direct numerical simulation and experimental analysis then to propose a simplified analytical model for prediction of the forces in order to optimize the parameters of the motion leading to maximum force. A great number of cases are investigated corresponding to different angles of attack,...
Numerical investigation of a Hawkmoth wing undergoing pure plunge motion in hover
Bektaş, Mürvet; Güler, Mehmet Ali; Kurtuluş, Dilek Funda (2019-09-20)
The aerodynamic phenomena of the flapping motion in hover mode is widely considered in micro air vehicle (MAV) applications. In this study, the aerodynamics of a three-dimensional rigid wing mimicked from the hawkmoth Manduca sexta is numerically investigated under pure plunge motion. The sinusoidal motion is provided with a user-defined function (UDF) to flap the wing, and the computational fluid dynamics (CFD) is used for the numerical analysis. This paper presents the effects of various parameters such a...
Accurate position control of a flapping-wing robot enabling free-flight flow visualisation in a wind tunnel
Karasek, Matej; Perçin, Mustafa; Cunis, Torbjorn; van Oudheusden, Bas W.; De Wagter, Christophe; Remes, Bart D. W.; de Croon, Guido C. H. E. (SAGE Publications, 2019-10-02)
Flow visualisations are essential to better understand the unsteady aerodynamics of flapping wing flight. The issues inherent to animal experiments, such as poor controllability and unnatural flapping when tethered, can be avoided by using robotic flyers that promise for a more systematic and repeatable methodology. Here, we present a new flapping-wing micro air vehicle (FWMAV)-specific control approach that, by employing an external motion tracking system, achieved autonomous wind tunnel flight with a maxi...
Experimental Investigation of Aerodynamics of Flapping-Wing Micro-Air-Vehicle by Force and Flow-Field Measurements
Deng, Shuanghou; Perçin, Mustafa; van Oudheusden, Bas (2016-02-01)
This study explores the aerodynamic characteristics of a flapping-wing micro aerial vehicle (MAV) in hovering configuration by means of force and flowfield measurements. The effects of flapping frequency and wing geometry on force generation were examined using a miniature six-component force sensor. Additional high-speed imaging allowed identification of the notable different deformation characteristics of the flexible wings under vacuum condition in comparison to their behavior in air, illustrating the re...
Experimental Investigation of Optimal Gap Distance between Rotors of a Quadrotor UAV
Kaya, Dilber Derya; Kutay, Ali Türker; Tekinalp, Ozan (2017-06-09)
The effect of spacing between the rotors of a quadrotor Unmanned Aerial Vehicle (UAV) in hovering flight is investigated. Experiments are conducted to obtain a mathematical relation between the diameter of the rotor and gap distance between each rotor. Constraints such as the maximum thrust force and minimum energy consumption are imposed. Several rotors having different sizes are tested at various RPMs with a changing gap distances, and total thrust produced by four rotors is measured. The results are give...
Citation Formats
D. F. Kurtuluş, “NUMERICAL AND EXPERIMENTAL ANALYSIS OF FLAPPING MOTION IN HOVER. APPLICATION TO MICRO AIR VEHICLES.,” 2005, Accessed: 00, 2021. [Online]. Available: http://etd.lib.metu.edu.tr/upload/12606168/index.pdf.