Physical properties and device application of CZTSSe thin films deposited by thermal evaporation method

Date

2017-05-26

Author

Terlemezoğlu, Makbule
Bayraklı, Özge
Güllü, Hasan Hüseyin
Çolakoğlu, Tahir
Parlak, Mehmet

Metadata

Show full item record

Item Usage Stats

107
views

0
downloads

URI

https://hdl.handle.net/11511/84139

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Physical properties of CdSe thin films produced by thermal evaporation and e-beam techniques Huş, Şaban Mustafa; Parlak, Mehmet; Department of Physics (2006) CdSe thin films were deposited by thermal evaporation and e-beam evaporation techniques on to well cleaned glass substrates. Low dose of boron have been implanted on a group of samples. EDAX and X-ray patterns revealed that almost stoichiometric polycrystalline films have been deposited in (002) preferred orientation. An analysis of optical measurements revealed a sharp increase in absorption coefficient below 700 nm and existence of a direct allowed transition. The calculated band gap was around 1.7 eV. Th...
Physical properties of Pd, Ni metals and their binary alloys Özdemir Kart, Sevgi; Tomak, Mehmet; Department of Physics (2004) The Sutton Chen and quantum Sutton Chen potentials are used in molecular dynamics simulations to describe the structural, thermodynamical, and transport properties of Pd, Ni and their binary alloys in solid, liquid, and glass phases. Static properties including elastic constants, pair distribution function, static structure factor, and dynamical properties consisting of phonon dispersion relation, diffusion coefficient, and viscosity are computed at various temperatures. The melting temperatures for Pd-Ni s...
Physical properties of litesse (polydextrose) substituted cakes Yazgan, Yaşar; Bozoğlu, Faruk; Katnaş, Zeynep; Department of Food Engineering (1997)
Physical Device Simulation of Partial Dopant-Free Asymmetric Silicon Heterostructure Solar Cell (P-DASH) based on Hole-selective Molybdenum Oxide (MoOx) with Crystalline Silicon (cSi) Mehmood, Haris; Nasser, Hisham; Ozkol, Engin; Tauqeer, Tauseef; Hussain, Shahzad; Turan, Raşit (2017-08-23) Silicon heterostructure solar cell based on p-type amorphous silicon(aSi:H) poses fundamental performance limitations due to the narrower band gap of aSi: H and the presence of band gap defects states. Such p-type a-Si: H layer can be replaced by novel carrier-selective Transition Metal Oxide (TMO) films such as Molybdenum oxide(MoOx) that offers higher work function and reduced parasitic absorption and thus enhanced photovoltaic performance. In this work, Silvaco TCAD simulation of Partial Dopant-Free Asym...
Physical device simulation of dopant-free asymmetric silicon heterojunction solar cell featuring tungsten oxide as a hole-selective layer with ultrathin silicon oxide passivation layer Mehmood, Haris; Nasser, Hisham; Zaidi, Syed Muhammad Hassan; Tauqeer, Tauseef; Turan, Raşit (2022-01-01) The dopant-related issues are amongst the major performance bottleneck in crystalline silicon solar cells that can be alleviated via implementation of dopant-free layers. This work presents the implementation of tungsten oxide (WOx) and titanium oxide (TiOx) as hole- and electron-selective films for heterostructure solar cell design whereby n-type Si wafer has been passivated with ultrathin silicon oxide (SiO2) layer. Several designs have been investigated including passivated hydrogenated amorphous silicon...

Citation Formats

M. Terlemezoğlu, Ö. Bayraklı, H. H. Güllü, T. Çolakoğlu, and M. Parlak, “Physical properties and device application of CZTSSe thin films deposited by thermal evaporation method,” 2017, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/84139.