Heat Analysis in Magneto-Acousto Electrical Impedance Tomograhy

Ghalichi, Elyar
Zengin, Reyhan
Gençer, Nevzat Güneri
In this study, heat analysis in Magneto-Acousto Electrical Impedance Tomography method is investigated numerically for a two-dimensional simplified breast model. The breast model is excited with a 16-element transducer at 1 MHz under 1 T static magnetic field for one second. The acoustic pressure wave absorption and resistive power dissipation are the sources for heat problem. During the excitation, the temperature increase in the breast tissues is 0.62 ◦C.
18th International Conference On Biomedical Applications Of Electrical Impedance Tomography (21 - 24 Haziran 2017)


Thermal Analysis and Rheological Study of Ocma Type Bentonite Used in Drilling Fluids
Kök, Mustafa Verşan (2013-01-01)
In this research, Ocma type of bentonite sample was studied by x-ray diffraction, Fourier transform spectrophotometer, viscometer, differential scanning calorimeter, and thermogravimetry. It was observed that the major clay mineral was smectite and montmorillonite. Different band intervals were studied by Fourier transform spectrophotometer. The weight loss regions related to the dehydration and de-hydroxylation process were determined by differential scanning calorimeter and thermogravimetry at different h...
DOGU, G; CABBAR, C; Doğu, Timur (Informa UK Limited, 1991-01-01)
The single-pellet moment techniques previously developed for the evaluation of effective diffusion coefficient and effective thermal conductivity of a porous solid are combined and a procedure is proposed for the simultaneous evaluation of these constants from a single set of pulse response experiments. It is shown that both temperature and concentration response curves can be measured from a single pulse of oxygen injected into hydrogen carrier gas flowing past a catalyst pellet. It is shown that the zerot...
Radiation impedance study of a capacitive micromachined ultrasonic transducer by finite element analysis
Bayram, Barış (2015-08-01)
In this study, radiation impedance of a capacitive micromachined ultrasonic transducer composed of square-shaped membranes arranged in m x m configuration (m = 1 - 5) is investigated using finite element analysis (FEA) of a commercially available software package (ANSYS). Radiation impedance is calculated for immersed membranes operating in conventional and collapse modes. Individual membrane response within the multi-membrane configuration is analyzed, and excited modes and their effects on radiation imped...
Nonlinear vibrations of curved single and doublewalled carbon nanotubes /
Samandari, Hamed; Ciğeroğlu, Ender; Department of Mechanical Engineering (2014)
In this thesis, effects of Geometric, initial curvature, and van der Waals (vdW) interlayer force nonlinearities on the variation of nonlinear natural frequency of Carbon Nanotubes (CNTs) are investigated in detail throughout several case studies. Galerkin method with a single trial function, which is the eigenfunction of the linear system, is widely used in literature in studying nonlinear vibrations of CNTs. However, eigenfunctions of the nonlinear systems can be significantly different than the eigenfunc...
Thermal analysis applications in fossil fuel science - Literature survey
Kök, Mustafa Verşan (2002-01-01)
In this study, instances where thermal analysis techniques ( differential scanning calorimetry, thermogravimetry, differential thermal analysis, etc.) have been applied for fossil fuel characterisation and kinetics are reviewed. The scientific results presented clearly showed that thermal analysis is a well-established technique used in fossil fuel research area. The literature survey showed that thermal methods were important not only theoretically but also from a practical point of view.
Citation Formats
E. Ghalichi, R. Zengin, and N. G. Gençer, “Heat Analysis in Magneto-Acousto Electrical Impedance Tomograhy,” New Hampshire, USA, 2017, p. 57, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/84637.