TGA and DSC investigation of different clay mineral effects on the combustion behavior and kinetics of crude oil from Kazan region, Russia

Date

2021-05-01

Author

Kök, Mustafa Verşan
Nurgaliev, Danis K.

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

335
views

0
downloads

In this research, the effect of different clay minerals (bentonite, illite and kaolinite) on the combustion behavior and kinetics of crude oils from Kazan region (Russia) was studied using thermogravimetry (TGA) and differential scanning calorimeter (DSC). The ramped temperature experiments were performed at constant heating rates (10, 20 and 30 degrees C/min) under air atmosphere. In both TGA and DSC experiments, two reaction zones were identified known as low temperature oxidation (LTO) and high temperature oxidation (HTO). The reaction regions, burnout temperatures, mass loss, heat of reaction and peak temperatures were determined. It was observed that the reaction intervals and the peak temperatures were also affected in the presence of different clay minerals. Kinetic parameters were calculated by Ozawa-Flynn-Wall (OFW), Kissenger-Akahira-Sunouse (KAS) kinetic methods. The addition of different clay minerals reduced the mass loss percentages of the crude oil samples due to the surface area effect. In addition, all clay samples show a good catalytic effect by a significant reduction in activation energy.

Subject Keywords

Clay, Combustion, Crude oil, Kinetic analysis, Thermogravimetry, Differential scanning calorimeter

URI

https://hdl.handle.net/11511/89751

Journal

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING

DOI

https://doi.org/10.1016/j.petrol.2021.108364

Collections

Department of Petroleum and Natural Gas Engineering, Article

Suggestions

OpenMETU
Core

Thermal behavior and kinetics of crude oils at low heating rates by differential scanning calorimeter Kök, Mustafa Verşan (2012-04-01) The objective of this research was to investigate thermal behavior and kinetics of different origin crude oils in limestone matrix by differential scanning calorimeter (DSC) at low heating rates. In DSC experiments, three distinct reaction regions were identified in all of the crude oil + limestone mixtures known as low temperature oxidation (LTO), fuel deposition (FD) and high temperature oxidation (HTO) respectively. Kinetic analysis of the crude oil samples was determined by different models known as AST...
DSC and rheometry investigations of crude oils Kök, Mustafa Verşan; Claudy, Pierre (1999-01-01) Thermal characteristics and rheological behaviour of eight crude oils covered a wide range of fluid composition and properties were studied by differential scanning calorimeter (DSC) and viscometry. Wax appearance temperatures (WAT) of crude oils were determined by DSC and viscometry. Good agreement is obtained between the results. The dynamic viscosity in the Newtonian temperature range of the crude oils (above 30 degrees C) generally obeyed a simple first-order Arrhenius type of temperature dependence. Ac...
Calorimetric study approach for crude oil combustion in the presence of clay as catalyst Varfolomeev, Mikhail A.; Nurgaliev, Danis K.; Kök, Mustafa Verşan (2016-01-01) In this research, the effect of heating rate and different clay concentrations on light and heavy crude oils in limestone matrix was investigated by differential scanning calorimeter (DSC). In DSC experiments, two main distinct reaction regions were identified in all of the crude oil + limestone matrix + catalyst, known as low- and high-temperature oxidation respectively. It was observed that addition of clay to porous matrix significantly affected the thermal characteristics and kinetics of different origi...
Thermal characterization of different origin class-G cements Kök, Mustafa Verşan (2014-02-01) In this study, thermal characteristics and kinetics of three different origin class-G cements (Mix, Bolu, and Nuh) were studied using thermogravimetry (TG/DTG) and differential scanning calorimeter (DSC). In DSC curves at different heating rates a number of peaks were observed consistently in different temperature intervals. TG/DTG is used to identify the detected phases and the corresponding mass loss. In the dehydration kinetic study of the different origin class-G cement samples, three different methods ...
Thermal decomposition of Tatarstan Ashal'cha heavy crude oil and its SARA fractions Varfolomeev, Mikhail A.; Galukhin, Andrey; Nurgaliev, Danis K.; Kök, Mustafa Verşan (2016-12-15) In this research, heavy crude oil from Ashal'cha field, Republic of Tatarstan, and its SARA (saturate, aromatic, resin and asphaltene) fractions were analyzed by differential scanning calorimetry (DSC) and thermogravimetry (TGA) methods. The experiments were performed at three different heating rates (10, 20, 30 degrees C/min) for DSC and at single heating rate for TGA analysis, all under the air atmosphere. In DSC experiments, two main reaction regions were detected at each heating rate known as low and hi...

Citation Formats

M. V. Kök and D. K. Nurgaliev, “TGA and DSC investigation of different clay mineral effects on the combustion behavior and kinetics of crude oil from Kazan region, Russia,” JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING, pp. 0–0, 2021, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/89751.