Aerobik-anoksik periyot sıralama farkının ardışık kesikli reaktörlerde granül üretimine ve azot-KOİ arıtım verimine etkisi

2012-11-22
Erşan, Yusuf Çağatay
Bayramoğlu, Tuba Hande

Suggestions

Aerobik granüllerle nütriyent gideriminde organik ve azot yükleme hızlarının etkisi
Kocaturk, İrem; Bayramoğlu, Tuba Hande (null; 2017-10-07)
Aerobik granüllerle nütriyent gideriminde organik ve azot yükleme hızlarının etkisi.
Kocatürk, İrem; Bayramoğlu, Tuba Hande (2019-05-01)
Development of a sabot design tool for aeroballistic range testing
Kafdağlı, Karaca Efe; Kayran, Altan; Department of Aerospace Engineering (2006)
The aim of this thesis is to investigate the general design and analysis principles of sabots and to develop a sabot design tool. Structures which support and align the models in gun bore, and separate without disturbing the flight path of models are called sabots. In the scope of this study, structurally critical regions and loads acting on sabots due to acceleration in the gun are determined. To calculate the loads acting and to size the sabots, approximate relations are derived by the help of strength of...
Modelling aerobic 4-chlorophenol and 2,4-dichlorophenol biodegradation-effect of biogenic substrate concentration
Şahinkaya, Erkan; Dilek, Filiz Bengü; Department of Environmental Engineering (2006)
Aerobic biodegradation kinetics of 4-Chlorophenol (4-CP) and 2,4-Dichlorophenol (2,4-DCP) by acclimated mixed cultures were examined separately and in mixture using batch and sequencing batch reactors (SBRs). Biodegradation abilities of acclimated mixed cultures were also compared with those of isolated pure species. Complete degradation of chlorophenols and high COD removal efficiencies were observed throughout the SBRs operation. During the degradation of 4-CP, 5-chloro-2-hydroxymuconic semialdehyde, (the...
Investigation of the flexible missile fins under aerothermal loadings
Özkökdemir, Emir; Kurtuluş, Dilek Funda; Department of Aerospace Engineering (2018)
Wings or fins on the body flying at the supersonic speed are subjected to the aerothermal loading. These loads are categorized into two main groups; aerodynamic pressure and aerodynamic heating. They affect the strength of wings. In this thesis study, a flexible NACA 65-009 wing of a missile flying at supersonic speed is investigated. It is studied to define the effect of the change in wing geometry by the external loads on the flow characteristics. The flow simulations are carried on Ansys Fluent that uses...
Citation Formats
Y. Ç. Erşan and T. H. Bayramoğlu, “Aerobik-anoksik periyot sıralama farkının ardışık kesikli reaktörlerde granül üretimine ve azot-KOİ arıtım verimine etkisi,” presented at the ÇEVKOS VII, İstanbul, Türkiye, 2012, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/91223.