Production of ductile pipe

Download
015527.pdf
1991
Dulkan, Fatih
Show full item record
82
views
0
downloads
https://hdl.handle.net/11511/9365
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Production of Al-Cu metallic foam
Karakuş, Selim; Öztürk, Tayfur; Department of Metallurgical and Materials Engineering (1998)
Production of Potassium Titanate Whisker Reinforced Dental Composites
Kapusuz, Derya; Park, Jongee; Öztürk, Abdullah (2013-01-01)
Potassium titanate (K2O.nTiO2) whiskers (KTWs) were produced by sol-gel method and embedded into UDMA-TEGDMA resins to produce KTW reinforced composites that could be used for both anterior and posterior fillings. The effect Ti/K molar ratio on the chemical, structural and functional properties of the KTWs was investigated using XRD, HR-TEM, and BET analysis. Morphology and the surface properties of the KTWs rely on the Ti/K ratio. However, HR-TEM studies clarified that the KTWs grow along [110] axis regard...
Production of silicon carbide reinforced aliminium matrix composites
Güyer, Bülent Sabri; Sarıoğlu, Filiz; Kalkanlı, Ali; Department of Metallurgical Engineering (1994)
Production of coal crusher hammer heads by bi-metal casting
Kırma, Turgut; Selçuk, Ekrem; Department of Metallurgical and Materials Engineering (2008)
In this study, by considering different mechanical properties such as wear resistance and toughness of two different metal alloys in design and production stages, bi-metal casting technique was used for producing composite material which will be a solution for the cracking and wear problem in coal crushing hammer heads. The failure analysis of the classical hammer heads which are made from Hadfield steels (austenitic steel) showed that there are crack formations through austenitic grains and also the phase ...
Production of high sulfur forging steels at Çemtaş steel plant
Gitmez, Cenk; Sevinç, Naci; Department of Metallurgical and Materials Engineering (2003)
This study was undertaken with the objective of determining the operation practice to be followed in production of forging quality aluminum killed steels with high sulfur contents in Çemtaş Steel Plant. Nowadays, many steel grades used in the automotive industry are required both to have improved rracliining characteristics and to be fully killed, Le. deoxidized with aluminum. The product which is manufactured as hot-rolled bars in steelmaking company is shaped with forging process and then, subjected to a ...
Citation Formats
F. Dulkan, “Production of ductile pipe,” Middle East Technical University, 1991.
METU IIS - Integrated Information Service open@metu.edu.tr