Wideband phase shifter design using lange coupler and radial stubs

Date

2010-12-20

Author

Boyacioǧlu, Gökhan
Demir, Şimşek

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

91
views

0
downloads

In this study, four wideband phase shifter circuits are designed and simulated for 6-18 GHz frequency range. Phase shifters are separately designed in order to get 11.25°, 22.5°, 45° and 90° phase shifts with minimum phase error and low return losses. Thin film production technique will be used to fabricate individual phase shifter circuits. Designs and EM simulations are performed by using Sonnet and ADS2008®. © 2010 IEEE.

Subject Keywords

Hybrid coupled phase shifter, Lange coupler, PIN diode, Radial stub

URI

https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=78650104640&origin=inward
https://hdl.handle.net/11511/95426

DOI

https://doi.org/10.1109/mmw.2010.5605131

Conference Name

2010 10th Mediterranean Microwave Symposium, MMS 2010

Collections

Department of Electrical and Electronics Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Waveform design for pulse doppler radar Ağırman, Handan; Severcan, Mete; Department of Electrical and Electronics Engineering (2005) This study is committed to the investigation of optimum waveforms for a pulse doppler radar which uses a non linear high power amplifier in the transmitter. The optimum waveform is defined as the waveform with the lowest peak and integrated side lobe level, the narrowest main lobe in its autocorrelation and the narrowest bandwidth in its spectrum. The Pulse Compression method is used in radar systems since it is more advantageous in terms of the resolution. Among all pulse compression methods, the main focu...
Triple stub circuit topology as simultaneous insertion phase, amplitude and impedance control circuit for phased array applications Unlu, M.; Demir, Şimşek; Akın, Tayfun (Institution of Engineering and Technology (IET), 2012-10-23) This study shows that the well-known triple stub circuit topology can also be used for controlling the insertion phase and amplitude of a given signal simultaneously, as well as preserving its impedance transformation ability. The triple stub circuit topology, which is nothing but an extension of the conventional double stub loaded-line phase shifter, results in one more degree of freedom to its solution when it is solved for its insertion phase. This additional degree of freedom not only brings the impedan...
High performance closed-loop analog readout circuit for capacitive MEMS accelerometers Terzioğlu, Yunus; Akın, Tayfun; Department of Electrical and Electronics Engineering (2015) In this thesis, a closed-loop analog readout circuit for capacitive MEMS accelerometers is introduced. The detailed analysis of the dynamics of the proposed accelerometer is presented along with the associated simulation models. The theoretical investigation of each building block of the accelerometer is also presented in detail and supported by the corresponding formulas. The implemented accelerometer is shown to satisfy the estimated performance parameters with measurements conducted using various test se...
Microcontroller controlled, multifrequency electrical impedance tomograph Arpınar, VE; Eyüboğlu, Behçet Murat (2001-10-28) In this study, development of a microcontroller controlled multifrequency electrical impedance tomography system is aimed. In this system, current injection and voltage measurements are both performed by the surface electrodes, which are microcontroller controlled. Data acquisition system process the measured signal using continuous time quadrature demodulator. After that, it converts analog information to digital and transfers it to the PC.
Nonlinear flutter calculations using finite elements in a direct Eulerian-Lagrangian formulation Seber, Guclu; Bendiksen, Oddvar O. (American Institute of Aeronautics and Astronautics (AIAA), 2008-06-01) A fully nonlinear aeroelastic formulation of the direct Eulerian-Lagrangian computational scheme is presented in which both structural and aerodynamic nonlinearities are treated without approximations. The method is direct in the sense that the calculations are done at the finite element level, both in the fluid and structural domains, and the fluid-structure system is time-marched as a single dynamic system using a multistage Runge-Kutta scheme. The exact nonlinear boundary condition at the fluid-structure...

Citation Formats

G. Boyacioǧlu and Ş. Demir, “Wideband phase shifter design using lange coupler and radial stubs,” presented at the 2010 10th Mediterranean Microwave Symposium, MMS 2010, Guzelyurt, Kıbrıs (Gkry), 2010, Accessed: 00, 2022. [Online]. Available: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=78650104640&origin=inward.