An approach to numerical simulation of three-dimensional flow with spray combustion

Download
056555.pdf
1996
Tarhan, Erhan
Show full item record
131
views
0
downloads
https://hdl.handle.net/11511/9679
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

An approach to the numerical solution of turbulent forced convection in vertical pipes.
Balat, Veli; Department of Mechanical Engineering (1983)
A Numerical approach for the solutions of fluid dynamics problems in the presence of magnetic field
Oğlakkaya, Fatma Sidre; Bozkaya, Canan; Department of Mathematics (2018)
This thesis is conducted to investigate numerically the two-dimensional steady or unsteady, laminar flow of viscous, incompressible and electrically conducting fluids in complex geometries subject to either uniform inclined magnetic field or nodal magnetic sources. Specifically, the hydromagnetic natural/mixed convection of either conventional fluid or water-based nanofluid flow and the heat transfer are considered in irregular enclosures with wavy walls. The equations governing the steady magnetohydrodynam...
An Approach to the Modeling of Physical Ageing in Rubbery Polymers
Dal, Hüsnü (2006-03-29)
The oxidation reactions responsible for physical ageing are thermally activated processes and yield cross-linking similar to the vulcanization process and chain-scission reactions. Chain scission, is responsible for the relaxation behaviour under constant stretch, whereas cross-linking is responsible for hardening of the material. The decrease in the stretch at break upon cross-linking motivates the so called network alteration proposed in this contribution.
An approach for the processing of strong-motion accelerograms.
Kubin, Jozef; Department of Civil Engineering (1982)
An approach to optimum hydraulic design of diversion weirs
Yanmaz, Ali Melih (2000-06-20)
A computer-assisted method is developed for the optimum hydraulic design of diversion weirs. With a number of relevant input parameters and a known design irrigation discharge, which can be estimated according to the project requirements of an irrigation field composed of a desired crop pattern, the overall dimensions of a diversion weir are determined. The program tests various combinations of dimensions for the structural elements, ie. intake, settling basin, spillway, energy dissipater, etc., within the ...
Citation Formats
E. Tarhan, “An approach to numerical simulation of three-dimensional flow with spray combustion,” Middle East Technical University, 1996.
METU IIS - Integrated Information Service open@metu.edu.tr