Investigations on tip tilting for HAWT rotor blades

2010-09-17
ELFARRA, MUNİR
Sezer Uzol, Nilay
Akmandor, ibrahim Sinan
10th International Conference on Clean Energy (ICCE-2010)

Suggestions

Investigations on Tangential Tip Tilting for HAWT Rotor Blades
Tonkal, Ozan Çağrı; Pehlivan, Sercan; Sezer Uzol, Nilay; İşler, Veysi (2010-09-17)
Investigations on bulk glass forming ability of titanium based multicomponent alloys
Süer, Sıla; Mekhrabov, Amdulla O.; Department of Metallurgical and Materials Engineering (2008)
The aim of this study is to investigate the bulk glass forming ability (BGFA) of Ti-based alloy systems. These investigations were carried out in two main parts that are complementary to each other: theoretical and experimental. For theoretical studies, which are based on electronic theory of alloys in pseudopotential approximation, Ti-Zr, Ti-Co and Ti-Cu alloys were chosen as the binary systems. Alloying element additions were performed to each binary for the investigation of the BGFA of multicomponent Ti-...
Studies on the control structure for a reactor-separation system
Kayakol, Nuray; Gürkan, Türker; Özgen, Canan; Department of Chemical Engineering (1990)
Investigations on Alternative Matrix Materials Towards the Efficiency of SiC Formation in C/SiC Ceramic Composites
Tülbez, Simge; Esen, Ziya; Dericioğlu, Arcan Fehmi (2018-10-27)
Investigations on axial flow compressor loss and deviation correlations applied to a through-flow computer code.
Arıtürk, M. Hakan; Department of Mechanical Engineering (1986)
Citation Formats
M. ELFARRA, N. Sezer Uzol, and i. S. Akmandor, “Investigations on tip tilting for HAWT rotor blades,” presented at the 10th International Conference on Clean Energy (ICCE-2010), Kıbrıs (Kktc), 2010, Accessed: 00, 2022. [Online]. Available: https://hdl.handle.net/11511/97099.