Microwave absorbing property of epoxy resin composites with added Fe3O4 nanoparticles

Date

2019-01-01

Author

Hashimov, Arif Mamed
Tabatabaei, Naser Mahdavi
Samedova, Ulker Farruk
Nuriyev, Musa Abdulali
Bayramov, Mazahir Nasraddin
Mehrabov, Amdulla

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

195
views

0
downloads

In this paper, we have successfully synthesized nanoparticles of Fe3O4 and composites based on epoxy resin with various mass ratios of nanomagnetite were prepared. The structure, morphology and properties of the composites were characterized with X-ray diffraction, scanning electron microscope. Results of measurements of reflection coefficients (R), transmission (T), and absorption (A) of the ER series composites of composites on basis of nano magnetite are presented in this paper.

Subject Keywords

Composite materials, Electromagnetic properties, Electromagnetic wave absorbers, Fe3O4 nano powders

URI

https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85067694500&origin=inward
https://hdl.handle.net/11511/97137

Journal

International Journal on Technical and Physical Problems of Engineering

Collections

Department of Metallurgical and Materials Engineering, Article

Suggestions

OpenMETU
Core

Microwave-assisted synthesis of Eu3+ doped lanthanum orthoborates, their characterizations and luminescent properties BADAN, Cansin; Esentürk, Okan; Yılmaz, Ayşen (2012-11-01) LaBO3 with various particle sizes have been successfully prepared by microwave-assisted combustion and sol-gel synthesis methods. Urea, citric acid and glycine have been used as fuels during the synthesis process. Characterizations were done by X-ray diffraction (XRD), Fourier Transform Infrared (FTIR) Spectroscopy, Photoluminescence Excitation and Emission Spectroscopies, Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM). The SEM micrographs show dissimilar morphologies of powd...
Thermal degradation of Polylactide/Poly(ethylene glycol) fibers and composite fibers involving organoclay Ozdemir, Esra; Hacaloğlu, Jale (2018-01-01) In this study, electrospun fibers of melt blended poly(lactic acid) and poly(ethylene glycol), (PLA)-PEG blends involving 10, 15 and 20 wt% PEG and their corresponding composites with organically modified montmorillonite, Cloisite 30B were prepared and characterized by x-ray diffraction, differential scanning calorimetry, thermogravimetry and direct pyrolysis mass spectrometry techniques. The narrower fiber diameters observed for the PLA-PEG fibers involving organoclay compared to the corresponding neat fib...
Thermal degradation of polythiophene-natural rubber and polythiophene-synthetic rubber conducting polymer composites Hacaloğlu, Jale; Akbulut, Ural; Toppare, Levent Kamil (1997-01-01) Thermal degradation of conducting polymer composites of polythiophene and rubbers was studied by direct and indirect pyrolysis mass spectrometry techniques. The samples were prepared by electrooxidation of polythiophene using natural rubber or synthetic rubber as the insulating matrix. Presence of decomposition products which were not observed during pyrolysis of pure polythiophene and rubbers, and disappearance of rubber-based pyrolysis mass peaks, together with changes in thermal stability and behaviour, ...
Magnetic and electromagnetic characterization of barium hexaferrite ceramics and their polymer matrix composites / Kaya, Seray; Dericioğlu, Arcan Fehmi; Öztürk, Abdullah; Department of Metallurgical and Materials Engineering (2014) In this study, BaHF-based polymer matrix composites were prepared as potential EM wave absorbing materials. Firstly, BaHF powders and platelets were synthesized by mixed oxide method and by molten salt synthesis (MSS) technique, respectively, which were further used as additives in the EM wave absorbing composites. The effect of molten salt composition on the amount of BaHF phase formation, as well as, on the morphology and magnetic properties of the final products were discussed according to the characteri...
Shape memory polymer composites containing carbon based fillers Şengör, İrem; Bayram, Göknur; Köysüren, Özcan; Department of Chemical Engineering (2013) The aim of this dissertation was to produce shape memory polymer nanocomposites using diglycidyl ether of bisphenol A (DGEBA) epoxy resin and isophorone diamine based cyclo-aliphatic curing agent. The polymer matrix was modified with aliphatic and aromatic monomers namely, neopentyl glycol diglycidyl ether (NGDE) and resorcinol diglycidyl ether (RDE). In the formation of composites, carbon black and carbon nanotubes were used separately and also together as hybrid filler. All samples were subjected to mecha...

Citation Formats

A. M. Hashimov, N. M. Tabatabaei, U. F. Samedova, M. A. Nuriyev, M. N. Bayramov, and A. Mehrabov, “Microwave absorbing property of epoxy resin composites with added Fe3O4 nanoparticles,” International Journal on Technical and Physical Problems of Engineering, vol. 11, no. 1, pp. 16–20, 2019, Accessed: 00, 2022. [Online]. Available: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85067694500&origin=inward.