Determination of displacements and stresses in isotropic and composite multi-link systems

Keleş, Cengiz Özdemir


Determination of current transport characteristics in Au-Cu/CuO/n-Si Schottky diodes
Surucu, O. Bayrakli; Güllü, Hasan Hüseyin; Terlemezoglu, M.; Yildiz, D. E.; Parlak, M. (Elsevier BV, 2019-10-01)
In this study, the material properties of CuO thin films fabricated by sputtering technique and electrical properties of CuO/n-Si structure were reported. Temperature-dependent current-voltage (I-V) measurement was carried out to determine the detail electrical characteristics of this structure. The anomaly in thermionic emission (TE) model related to barrier height inhomogeneity at the interface was obtained from the forward bias I-V analysis. The current transport mechanism at the junction was determined ...
Determination of transient and steady state thermal stresses and moments through electrical analogy.
Anlağan, Ömer; Department of Mechanical Engineering (1969)
Determination of out-of-step blockibg conditions in high voltage networks.
Atabay, Tarhan M H; Department of Electrical Engineering (1973)
Determination of passive vibration isolation characteristics of jet aircraft avionics
Eker, Zafer; Yaman, Yavuz; Department of Aerospace Engineering (2019)
Airborne electronics are subjected to adverse effects of vibration exposure that is defined by military standards to be used in the design stage. It is important to ensure the sustainability of such equipment through vibration isolation. Passive isolation mechanism distinguishes as the simplest practice for this purpose, which is applied in this study. In this thesis, a complete design of the isolation system is achieved by creating the representative mathematical model, implementing the vibration analysis ...
Determination of degree of mixing in solid rocket propellants
Yeşilırmak, Yener; Yılmazer, Ülkü; Department of Chemical Engineering (2006)
Composite propellants are mainly composed of: crystalline oxidizer, metallic fuel, and polymeric binder. Additives, such as plasticizers, catalysts, bonding agents and curing agents may also be incorporated to propellant compositions in small amounts. These ingredients should be mixed rigorously in order to obtain a uniform microstructure throughout the cast propellant profile. The quality of the propellant mixture has to be determined quantitatively to improve the product quality and to reduce costs. In th...
Citation Formats
C. Ö. Keleş, “Determination of displacements and stresses in isotropic and composite multi-link systems,” Middle East Technical University, 1995.