Determination of out-of-step blockibg conditions in high voltage networks.

Atabay, Tarhan M H


Determination of risk of failure in EHV systems.
Şener, Şerif; Department of Electrical Engineering (1978)
Determination of displacements and stresses in isotropic and composite multi-link systems
Keleş, Cengiz Özdemir; Oral, Süha; İder, Kemal; Department of Mechanical Engineering (1995)
Determination of network delay distribution over the internet
Karakaş, Mehmet; Ergül, Faruk Rüyal; Department of Electrical and Electronics Engineering (2003)
The rapid growth of the Internet and the proliferation of its new applications pose a serious challenge in network performance management and monitoring. The current Internet has no mechanism for providing feedback on network congestion to the end-systems at the IP layer. For applications and their end hosts, end-to-end measurements may be the only way of measuring network performance. Understanding the packet delay and loss behavior of the Internet is important for proper design of network algorithms such ...
Determination of current transport characteristics in Au-Cu/CuO/n-Si Schottky diodes
Surucu, O. Bayrakli; Güllü, Hasan Hüseyin; Terlemezoglu, M.; Yildiz, D. E.; Parlak, M. (Elsevier BV, 2019-10-01)
In this study, the material properties of CuO thin films fabricated by sputtering technique and electrical properties of CuO/n-Si structure were reported. Temperature-dependent current-voltage (I-V) measurement was carried out to determine the detail electrical characteristics of this structure. The anomaly in thermionic emission (TE) model related to barrier height inhomogeneity at the interface was obtained from the forward bias I-V analysis. The current transport mechanism at the junction was determined ...
Determination of flow through centrifugal pump impellers.
Acarbay, Ayşe; Department of Mechanical Engineering (1969)
Citation Formats
T. M. H. Atabay, “Determination of out-of-step blockibg conditions in high voltage networks.,” Middle East Technical University, 1973.