Determination of transient and steady state thermal stresses and moments through electrical analogy.

Date

1969

Author

Anlağan, Ömer

Metadata

Show full item record

Item Usage Stats

109
views

0
downloads

URI

https://hdl.handle.net/11511/7557

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Determination of displacements and stresses in isotropic and composite multi-link systems Keleş, Cengiz Özdemir; Oral, Süha; İder, Kemal; Department of Mechanical Engineering (1995)
Determination of out-of-step blockibg conditions in high voltage networks. Atabay, Tarhan M H; Department of Electrical Engineering (1973)
Calculation of internal conversion coefficients of outer shell electrons of Nb,Tc,Tm at low transition energies. Okumuşoğlu, Nazmi Turan; Department of Physics (1972)
Determination of harmonic current contributions based on robust state estimation Sezgin, Erhan; Göl, Murat; Salor, Ozgul (2018-01-01) In this paper, a state estimation based method is proposed to determine harmonic current contributions of plants supplied from a point of common coupling (PCC). This work mainly aims to reduce gross error of capacitive voltage transformer (CVT) measurements at harmonic frequencies using robust weighted least absolute value (WLAV) state estimation method, which provides the optimum state estimates for harmonic voltages in the presence of a redundant enough measurement set. Estimated harmonic voltages are the...
Determination of rough surface contact stiffness coefficient Yıldırım, Emine Gülşah; Akkök, Metin; Department of Mechanical Engineering (2017) In this thesis, the resistance against deformation under the effect of loading, which is simply called as stiffness, is investigated for the contacting bodies. The contact stiffness at mixed lubrication regime is tried to be found for line contact. Because of the mixed lubrication regime, the overall contact stiffness is investigated in two major parts as asperity stiffness and oil film stiffness which are considered to be connected in parallel in a spring model. Also, overall stiffness is calculated by reg...

Citation Formats

Ö. Anlağan, “Determination of transient and steady state thermal stresses and moments through electrical analogy.,” Middle East Technical University, 1969.