Optimum design of prestressed concrete beams by non-linear programming

Download
047275.pdf
1995
Oktar, Behçet Ömer
Show full item record
54
views
0
downloads
https://hdl.handle.net/11511/10310
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Optimum design of reinforced concrete cantilever retaining walls by non-linear programming
Sarıbaş, Aşkın; Erbatur, Fuat; Department of Civil Engineering (1995)
Optimum Detailed Design of Reinforced Concrete Continuous Beams using the Harmony Search Algorithm
Akin, A.; Saka, M. P. (2010-09-17)
Design optimization of reinforced concrete structures is more challenging than that of steel structures due to the complexity associated with reinforcement design. In this study, optimum design algorithm is presented for reinforced concrete continuous beams. The design variables are selected as the width and the depth of beams in each span, the diameter and the number of longitudinal reinforcement bars along span and supports, and the diameter of ties. The design constraints are implemented from ACI 318-05 ...
Optimum design of rigid and semi-rigid steel sway frames including soil-structure interaction
Doğan, Erkan; Saka, M. Polat; Department of Engineering Sciences (2010)
In this study, weight optimization of two dimensional steel frames is carried out in which the flexibility of beam-to-column connections and the soil-structure interaction are considered. In the analysis and design of steel frames, beam-tocolumn connections are assumed to be either fully rigid or perfectly pinned. However, the real behavior of beam-to-column connections is actually between these extremes. Namely, even the simple connections used in practice possess some stiffness falling between these two c...
Optimum design of reinforced concrete plane frames using harmony search algorithm
Akın, Alper; Saka, Mehmet Polat; Department of Engineering Sciences (2010)
In this thesis, the optimum design algorithm is presented for reinforced concrete special moment frames. The objective function is considered as the total cost of reinforced concrete frame which includes the cost of concrete, formwork and reinforcing steel bars. The cost of any component is inclusive of material, fabrication and labor. The design variables in beams are selected as the width and the depth of beams in each span, the diameter and the number of longitudinal reinforcement bars along the span and...
Optimum design of composite laminates with curved fiber courses under strength and stability constraints
Kasap, İsmail; Oral, Süha; Department of Mechanical Engineering (1996)
Citation Formats
B. Ö. Oktar, “Optimum design of prestressed concrete beams by non-linear programming,” Middle East Technical University, 1995.
METU IIS - Integrated Information Service open@metu.edu.tr