An experimental and numerical approach to shallow focus earthquake mechanism

Download
056482.pdf
1996
Sarı, Dursun
Show full item record
144
views
114
downloads
Seismometry., Earthquakes.
https://hdl.handle.net/11511/1032
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

A General evaluation of linear elastic assessment procedures in seismic codes
Özçamur, Uğurcan; Sucuoğlu, Haluk; Department of Civil Engineering (2014)
Linear elastic procedures are extensively used in seismic codes either for design or assessment, however it does not necessarily mean that they are always accurate. In the first part of this study, performance limits of the force-based linear assessment procedure in the Turkish Earthquake Code are verified and calibrated with the displacement-based performance limits which are obtained from experimental data. Four case study buildings, all of which satisfy code design requirements are assessed with force ba...
A methodology for determination of performance based design parameters
Yazgan, Ufuk; Gülkan, Polat; Yakut, Ahmet; Department of Civil Engineering (2003)
An Assessment of the relationship between the local site effects and the distribution of damage in the city of Yalova (Turkey) during 17 August 1999 İzmit earthquake
İlhan, Cemal; Bakır, Bahadır Sadık; Yılmaz, Mustafa Tolga; Department of Civil Engineering (2015)
The relationship between the local site effects and the damage distribution at the City Centre of Yalova after 1999 İzmit earthquake is investigated. The spatial distribution of building damage is presented by compiling the damage statistics reported after the event. It is observed that structural damage at the coastal areas and the ridges were limited. The most severe damage, however, was observed on Hacımehmet Basin and on the west side of Bağlarbaşı Quarter. Peak ground acceleration during the earthquake...
An Implementation of probabilistic seismic hazard analysis in selection of seismic coefficient for pseudostatic analysis of slope stability
Gedikaslan, Kübra; Yılmaz, Mustafa Tolga; Erberik, Murat Altuğ; Department of Earthquake Studies (2017)
The seismic coefficient, kh, is a seismic design parameter. This parameter defines the ratio of inertial force acting on a mass to its weight, and is practically used in pseudostatic analyses of seismic slope stability. This design parameter can be assigned by the principles of performance-based design after simplifications regarding the relationship between ground displacement and probabilistic seismic hazard. A widely used simplification is to consider Newmark's sliding block analogy for estimations of se...
Marker gene transfer to sunflower (Helianthus annuus L.) via particle bombardment
Polat, Ceren Deniz; Önde, Sertaç; Özgen, Murat; Department of Biological Sciences (2002)
Citation Formats
D. Sarı, “An experimental and numerical approach to shallow focus earthquake mechanism,” Ph.D. - Doctoral Program, Middle East Technical University, 1996.
METU IIS - Integrated Information Service open@metu.edu.tr