Axisymmetric deformation of steel wire reinforced alunimium.

Download

056787.pdf

Date

1996

Author

Toklutepe, Burak

Metadata

Show full item record

Item Usage Stats

108
views

0
downloads

URI

https://hdl.handle.net/11511/10677

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Axisymmetric crack terminating at the interface of transversely isotropic dissimilar media Kadıoğlu, Fevzi Suat (Springer Science and Business Media LLC, 2002-07-01) In this paper, the axisymmetric elasticity problem of an infinitely long transversely isotropic solid cylinder imbedded in a transversely isotropic medium is considered. The cylinder contains an annular or a penny shaped crack subjected to uniform pressure on its surfaces. It is assumed that the cylinder is perfectly bonded to the medium. A singular integral equation of the first kind (whose unknown is the derivative of crack surface displacement) is derived by using Fourier and Hankel transforms. By perfor...
Axisymmetric contact problem for two elastic layers under the effect of ring shaped loads Gürsoy, Akın; Yahşi, O. Selçuk; Department of Mechanical Engineering (1990)
Axisymmetric finite cylinder with rigid ends and a circumferential edge crack Durucan, Ayşe Ruşen; Geçit, M. Ruşen; Department of Engineering Sciences (2010) An axisymmetric finite cylinder with rigid ends and a circumferential edge crack is considered in this study. The finite cylinder is under the action of uniformly distributed loads at two rigid ends. Material of the finite cylinder is assumed to be linearly elastic and isotropic. This finite cylinder problem is solved by considering an infinite cylinder containing an internal ring-shaped crack located at z=0 plane and two penny-shaped rigid inclusions located at z=±L planes. General expressions of the infin...
Axisymmetric finite cylinder with one end clamped and the other under uniform tension containing a penny-shaped crack KAMAN, METE ONUR; Gecit, Mehmet Rusen (Elsevier BV, 2008-09-01) This study considers the axisymmetric analysis of a finite cylinder containing a penny-shaped transverse crack. Material of the cylinder is assumed to be linearly elastic and isotropic. One end of the cylinder is bonded to a fixed support while the other end is subjected to uniform axial tension. Solution is obtained by superposing the solutions for an infinite cylinder loaded at infinity and an infinite cylinder containing four cracks and a rigid inclusion loaded along the cracks and the inclusion. When th...
Axisymmetric crack problem for a hollow cylinder imbedded in a dissimilar medium Kadıoğlu, Fevzi Suat (Elsevier BV, 2005-05-01) The analytical solution for the linear elastic problem of flat annular crack in a transversely isotropic hollow cylinder imbedded in a transversely isotropic medium is considered. The hollow cylinder is assumed to be perfectly bonded to the surrounding medium. This structure, which can represent a cylindrical coating-substrate system, is subjected to uniform crack surface pressure. Because of the geometry and the loading, the problem is axisymmetric. The z = 0 plane on which the crack lies, is also a plane ...

Citation Formats

B. Toklutepe, “Axisymmetric deformation of steel wire reinforced alunimium.,” Middle East Technical University, 1996.