Refining of copper radiator scraps

Download
056636.pdf
1996
Uysal, Oktay
Show full item record
139
views
0
downloads
https://hdl.handle.net/11511/10678
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Production of coated pigments for paint.
Akdeniz, Hasan; Department of Chemical Engineering (1974)
Production of fly ash-magnesium phosphate cements
Bilginer, Baki Aykut; Erdoğan, Sinan Turhan (null; 2019-05-02)
Magnezyum fosfat çimentolu (özellikle magnezyum potasyum fosfat çimentolu [MKPC]) bağlayıcılar Portland çimentosuna kısmi alternatif olabilecek sistemlerdir. MKPC yaygın olarak kalsine MgO tozu ve potasyum dihidrojen fosfat tuzu kullanılarak hazırlanır. Sulu karışımda meydana gelen asit-baz tepkimesi çok hızlı gerçekleştiğinden, bir geciktirici (boraks) de eklenir. MKPC’nin çabuk priz alma, çok hızlı dayanım kazanma ve yüksek nihai dayanım gibi geleneksel çimentolu sistemlere üstün yan...
Production of Potassium Titanate Whisker Reinforced Dental Composites
Kapusuz, Derya; Park, Jongee; Öztürk, Abdullah (2013-01-01)
Potassium titanate (K2O.nTiO2) whiskers (KTWs) were produced by sol-gel method and embedded into UDMA-TEGDMA resins to produce KTW reinforced composites that could be used for both anterior and posterior fillings. The effect Ti/K molar ratio on the chemical, structural and functional properties of the KTWs was investigated using XRD, HR-TEM, and BET analysis. Morphology and the surface properties of the KTWs rely on the Ti/K ratio. However, HR-TEM studies clarified that the KTWs grow along [110] axis regard...
Production of heavy-media-quality magnetite concentrate from Kesikköprü iron ore tailings
Güngör, Kazım; Atalay, M Ümit; Department of Mining Engineering (2010)
The aim of this research was to investigate the possibility of the production of a magnetite concentrate which is suitable for preparation of heavy media from iron ore tailings of Güncem Mining Company magnetic separation facility. During the study, three different tailings named as low grade, medium grade and high grade with 5.91 % Fe3O4, 19.06 % Fe3O4 and 37.06 % Fe3O4, respectively, were used. Mineralogical analyses of test samples showed that magnetite and hematite were the major ore minerals while pyri...
Extraction of copper and zinc from brass-melting dross
Tezer, Sadık; Timuçin, Muharrem; Department of Metallurgical Engineering (1974)
Citation Formats
O. Uysal, “Refining of copper radiator scraps,” Middle East Technical University, 1996.
METU IIS - Integrated Information Service open@metu.edu.tr