Determination of heat transfer coefficient for saturated flow boiling of water

Download

028707.pdf

Date

1993

Author

Ağlar, Fahri

Metadata

Show full item record

Item Usage Stats

524
views

0
downloads

URI

https://hdl.handle.net/11511/10931

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Determination of current transport characteristics in Au-Cu/CuO/n-Si Schottky diodes Surucu, O. Bayrakli; Güllü, Hasan Hüseyin; Terlemezoglu, M.; Yildiz, D. E.; Parlak, M. (Elsevier BV, 2019-10-01) In this study, the material properties of CuO thin films fabricated by sputtering technique and electrical properties of CuO/n-Si structure were reported. Temperature-dependent current-voltage (I-V) measurement was carried out to determine the detail electrical characteristics of this structure. The anomaly in thermionic emission (TE) model related to barrier height inhomogeneity at the interface was obtained from the forward bias I-V analysis. The current transport mechanism at the junction was determined ...
Determination of degree of mixing in solid rocket propellants Yeşilırmak, Yener; Yılmazer, Ülkü; Department of Chemical Engineering (2006) Composite propellants are mainly composed of: crystalline oxidizer, metallic fuel, and polymeric binder. Additives, such as plasticizers, catalysts, bonding agents and curing agents may also be incorporated to propellant compositions in small amounts. These ingredients should be mixed rigorously in order to obtain a uniform microstructure throughout the cast propellant profile. The quality of the propellant mixture has to be determined quantitatively to improve the product quality and to reduce costs. In th...
Determination of surface temperature rise on spur gears Taburdağıtan, Murat; Akkök, Metin; Department of Mechanical Engineering (2001)
Determination of surface temperature rise with thermo-elastic analysis of spur gears Taburdagitan, Murat; Akkök, Metin (2006-09-20) The tooth surface temperature rise during meshing spur gear pair due to frictional heat is investigated. A coupled thermo-elastic analysis is carried out by considering the elastic deformation of teeth and corresponding load shearing between the contacting tooth pairs and heat generation in the contact. In the analysis, gear pairs with contact ratio between one and two are considered and pinion and gear are modeled only with three teeth. The finite element analysis is performed using quadrilateral 4-node pl...
Determination of econamical diameter of steel penstocks in hydropower plants Kutluay, Lutfi; Günyaktı, Ali; Department of Civil Engineering (1991)

Citation Formats

F. Ağlar, “Determination of heat transfer coefficient for saturated flow boiling of water,” Middle East Technical University, 1993.