Determination of econamical diameter of steel penstocks in hydropower plants

Download
013170.pdf
1991
Kutluay, Lutfi
Show full item record
101
views
0
downloads
https://hdl.handle.net/11511/7434
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Determination of degree of mixing in solid rocket propellants
Yeşilırmak, Yener; Yılmazer, Ülkü; Department of Chemical Engineering (2006)
Composite propellants are mainly composed of: crystalline oxidizer, metallic fuel, and polymeric binder. Additives, such as plasticizers, catalysts, bonding agents and curing agents may also be incorporated to propellant compositions in small amounts. These ingredients should be mixed rigorously in order to obtain a uniform microstructure throughout the cast propellant profile. The quality of the propellant mixture has to be determined quantitatively to improve the product quality and to reduce costs. In th...
Determination of the total amount of dust and it's concentration dispersion after blasting in surface mines
Uyar, Güzin Gülsev; Paşamehmetoğlu, Günhan; Department of Mining Engineering (1996)
Determination of instantaneous breaking rate by Geological Strength Index, Block Punch Index and power of impact hammer for various rock mass conditions
Aksoy, C. O.; Ozacar, V.; Demirel, Nuray; Ozer, S. C.; Safak, S. (Elsevier BV, 2011-07-01)
In mining and construction industries, selection of appropriate excavation method and equipment significantly affects the project feasibility. In the selection, the most important parameters are the geomechanical properties of the rock mass in the excavation route as extensively reviewed in literature. The most widely used geomechanical parameter is uniaxial compressive strength (UCS). However, UCS laboratory test requires time consuming and expensive sampling and core sample preparation processes, which ca...
Determination of heat transfer coefficient for saturated flow boiling of water
Ağlar, Fahri; Yeşin, Orhan; Department of Nuclear Engineering (1993)
Determination of stress intensity factors in cracked panels reinforced with riveted stiffeners
Sayar, Mehmet Burak; Kayran, Altan; Department of Aerospace Engineering (2012)
This thesis presents a study about the determination of the stress intensity factors in cracked sheets with riveted stiffeners. Stress intensity factors are determined with both analytical method and finite element method for different combination of rivet/stringer spacing and stringer to sheet stiffness ratio. Analytical part of the thesis is a replication of the original study of Poe which assumes rigid rivet connections with no stringer offset. In the analytical part, the whole systems of equations of Po...
Citation Formats
L. Kutluay, “Determination of econamical diameter of steel penstocks in hydropower plants,” Middle East Technical University, 1991.
METU IIS - Integrated Information Service open@metu.edu.tr