Analysis and performance evaluation of current balance pilot wire protection systems

El-korek, M. Ali Jamal


Analysis and design of induction heating work coils
El-Fatallah, Ali; Ermiş, Muammer; Department of Electrical and Electronics Engineering (1988)
Analysis and capacity design of ductile concrete coupled walls
Başkonuş, Tolga; Atımtay, Ergin; Department of Civil Engineering (1999)
Analysis and design of wideband antenna arrays
Çapraz, Kenan; Alatan, Lale; Department of Electrical and Electronics Engineering (2014)
Two methods of wideband array design are studied. The aim of this study is to investigate arrays with aperiodic spacings which are designed with these methods in order to obtain wideband behavior. These methods are genetic algorithm and wavelength scaled arrays that have active regions with variable interelement spacings. Genetic algorithm is utilized for array antennas with aperiodic spacing to optimize sidelobe levels of the antenna array in wide frequency band. Wavelength scaled spacing concept in design...
Analysis and optimization of activated carbon coated heat sinks
Günay, Ahmet Alperen (2022-01-01)
With the enhancements in nanotechnology, electronic devices shrank in size which led to a necessity to develop efficient thermal management strategies. These small electronic devices could be thermally managed through passive systems provided that effective materials are developed. Here, we use a layer of activated carbon on top of anodized aluminum heat sinks to utilize the sorption cycle of atmospheric water to create a desorption induced evaporative cooling effect. The material properties of the activate...
Analysis, design, and implementation of a 5 kw zero voltage switching phase-shifted full-bridge DC/DC converter based power supply for arc welding machines
Uslu, Mutlu; Hava, Ahmet Masum; Department of Electrical and Electronics Engineering (2006)
Modern arc welding machines utilize controllable high frequency DC/DC power supply with high dynamic and steady state current regulation performance. In the design robustness, small size and low weight, low complexity, and high efficiency are the defining criteria. The most suitable approach for a 5 kW arc welding machine power supply application is the high frequency Full-Bridge Phase-Shifted Zero Voltage Switching (FB-PS-ZVS) DC/DC converter with an isolation transformer. This converter not only gives the...
Citation Formats
M. A. J. El-korek, “Analysis and performance evaluation of current balance pilot wire protection systems,” Middle East Technical University, 1996.