Constant strain rate stress corrosion testing of 7050 aluminum alloy

Download

003598.pdf

Date

1988

Author

Masadeh, Sami

Metadata

Show full item record

Item Usage Stats

84
views

0
downloads

URI

https://hdl.handle.net/11511/11111

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Constant water content direct shear testing of compacted residual soils ÜYETÜRK, CELAL EMRE; Huvaj Sarıhan, Nejan (Springer Science and Business Media LLC, 2020-08-01) Mechanical behavior of residual soils are studied by performing constant water content direct shear tests on reconstituted specimens using total stress analysis. The testing program involves initial degree of saturation (Sr) and applied normal stress as the control parameters. For three different soil samples, a total of 55 direct shear tests are conducted at Sr = 60%, 80%, and saturated conditions, in the normal stress range of 15-60 kPa. The results showed that shear strength increases with decreasing Sr ...
Constant beamwidth ridged horn antenna design and implementation Altungüneş, İnanç; Hızal, Altunkan; Department of Electrical and Electronics Engineering (2003)
Constant voltage, constant frequency operation of a self-excited induction generator Çalışkan, Ahmet; Üçtuğ, Yıldırım; Department of Electrical and Electronics Engineering (2005) In this thesis, control schemes for the self-excited induction generator are developed with Matlab/Simulink. Self-excited induction generator is considered as a constant voltage-constant frequency supply for an isolated load. A wind turbine is assumed to be the variable-speed drive of the induction generator. Control schemes aim to ensure a constant voltage-constant frequency operation of the induction generator in case of the variations in the wind speed and/or the load. From the general model of the self-...
NATURAL VIBRATION CHARACTERISTICS OF ROTATING, COMPOSITE MULTI-LAYER BEAMS AND BLADES Tekinalp, Ozan; YAVUZ, A (1994-07-21)
Continuously Tunable Emission in Inverted Type-I CdS/CdSe Core/Crown Semiconductor Nanoplatelets Delikanli, Savas; Guzelturk, Burak; Hernandez-Martinez, Pedro L.; Erdem, Talha; Keleştemur, Yusuf; Olutas, Murat; Akgul, Mehmet Zafer; Demir, Hilmi V. (2015-07-01) The synthesis and unique tunable optical properties of core/crown nanoplatelets having an inverted Type-I heterostructure are presented. Here, colloidal 2D CdS/CdSe heteronanoplatelets are grown with thickness of four monolayers using seed-mediated method. In this work, it is shown that the emission peak of the resulting CdS/CdSe heteronanoplatelets can be continuously spectrally tuned between the peak emission wavelengths of the core only CdS nanoplatelets (421 nm) and CdSe nanoplatelets (515 nm) having th...

Citation Formats

S. Masadeh, “Constant strain rate stress corrosion testing of 7050 aluminum alloy,” Middle East Technical University, 1988.