Development of a pc numerical system for high voltage sphere gap control

Download
2005
Kasap, Onur
In this thesis, a high precision motion and position control system has been developed and applied to a high voltage sphere gap control and measurement system. The system is able to support up to 3-axes position and motion control. The control system includes a microcontroller card, three DC servo motor driver cards and a data storage unit. To provide communication between computer and motion control system, the Universal Serial Bus (USB) port is used. The microcontroller card is equipped with an USB interface and a PIC (Peripheral Interface Controllers) microcontroller. This microcontroller controls the dedicated motion control processors (LM629), on servo motor driver cards and read/write operations of data storage unit, which consists of a Multi Media Card.

Suggestions

Development of electrochemical etch-stop techniques for integrated MEMS sensors
Yaşınok, Gözde Ceren; Akın, Tayfun; Department of Electrical and Electronics Engineering (2006)
This thesis presents the development of electrochemical etch-stop techniques (ECES) to achieve high precision 3-dimensional integrated MEMS sensors with wet anisotropic etching by applying proper voltages to various regions in silicon. The anisotropic etchant is selected as tetra methyl ammonium hydroxide, TMAH, considering its high silicon etch rate, selectivity towards SiO2, and CMOS compatibility, especially during front-side etching of the chip/wafer. A number of parameters affecting the etching are inv...
Analysis and design of passive microwave and optical devices using the multimode interference technique
Sunay, Ahmet Sertaç; Birand, Mehmet Tuncay; Department of Electrical and Electronics Engineering (2005)
The Multimode Interference (MMI) mechanism is a powerful toool used in the analysis and design of a certain class of optical, microwave and millimeter wave devices. The principles of the MMI method and the self-imaging principle is described. Using this method, NXM MMI couplers, MMI splitter/combiners are analyzed. Computer simulations for illustrating the "Multimode Interference Mechanism" are carried out. The MMI approach is used to analyze overmoded 'rectangular metallic' and 'dielectric slab' type of wa...
Design and implementation of microwave lumped components and system integration using MEMS technology
Temoçin, Engin Ufuk; Akın, Tayfun; Department of Electrical and Electronics Engineering (2006)
This thesis presents the design and fabrication of coplanar waveguide to microstrip transitions and planar spiral inductors, and the design of metal-insulator-metal capacitors, a planar band-pass, and a low-pass filter structures as an application for the inductors and capacitors using the RF MEMS technology. This thesis also includes a packaging method for RF MEMS devices with the use of “benzocyclobutene” as bonding material. The transition structures are formed by four different methods between coplanar ...
Design and Implementation of a Microprocessor Based Data Collection and Interpretation System with Onboard Graphical Interface
Göksügür, Gökhan; Güran, Hasan Cengiz; Department of Electrical and Electronics Engineering (2004)
This thesis reports the design and implementation of a microprocessor based interface unit of a navigation system. The interface unit is composed of a TFT display screen for graphical interface, a Controller Circuit for system control, a keypad interface for external data entrance to the system and a power interface circuit to provide interface between the battery of the navigation system and the Controller Circuit. This thesis reports high speed design of the Controller Circuit and generation of system fun...
High performance readout electronics for uncooled infrared detector arrays
Yıldırım, Ömer Özgür; Akın, Tayfun; Department of Electrical and Electronics Engineering (2006)
This thesis reports the development of high performance readout electronics for resistive microbolometer detector arrays that are used for uncooled infrared imaging. Three different readout chips are designed and fabricated by using a standard 0.6 m CMOS process. Fabricated chips include a conventional capacitive transimpedance amplifier (CTIA) type readout circuit, a novel readout circuit with dynamic resistance nonuniformity compensation capability, and a new improved version of the CTIA circuit. The fabr...
Citation Formats
O. Kasap, “Development of a pc numerical system for high voltage sphere gap control,” M.S. - Master of Science, Middle East Technical University, 2005.