Conceptual design and analysis of an industrial type vacuum sweeper

Download
index.pdf
2009
Aygün, Buket
Show full item record
576
views
283
downloads
In this thesis, design and development and manufacturing processes of an industrial type vacuum sweeper is presented. Thesis is financially supported by Ministry of Industry and Trade-Turkey and Müsan A.Ş. (Makina Üretim Sanayi ve Ticaret A.Ş.) under SAN-TEZ project number 00028.STZ.2007-1. It is aimed to make innovative design changes and developments on the Müsan VSM 060 type vacuum sweeper. To achieve this aim, alternative configuration designs are prepared by using commercial 3D modeling program, Catia™ V5. Basic vehicle structure is constructed. New Müsan VSM 060 will be a fully electrically driven vehicle. All subsystems will be activated by using electrical motors whose power is supplied by batteries. All subsystems are mounted on the chassis which is a welded frame structure made up of 60x40x2 St37-2 grade steel tubes. Finite element analysis (FEA) of the chassis is performed by using commercial structural finite element analysis tools MSC Patran pre and post processor and MSC Nastran solver. Moment calculations are done for structural parts. Cleaning system of the new VSM 060 vehicle is decided to be a combination of mechanical and vacuum cleaning systems. An elevator system will be integrated in addition to vacuum system to pick up coarse particles. The vacuum system will mainly be utilized for very small size particle collection. Computational fluid dynamics (CFD) analyses are done by Punto Mühendislik Ltd. Şti. for the whole cleaning system components by using CFdesign, an upfront CFD analysis tool.
Mechanical engineering.
http://etd.lib.metu.edu.tr/upload/2/12610438/index.pdf
https://hdl.handle.net/11511/18429
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Development of a two-fingered and a four-fingered robotic gripper
Doğan, Burak; Soylu, Reşit; Department of Mechanical Engineering (2010)
In this thesis study, a two-fingered gripper and a four-fingered multipurpose gripper are developed and manufactured. In addition to development of robotic hands, computer control hardware and software are also developed for computer control of both hands. The two-fingered gripper is designed for a specially defined pick and place operation. Its task is to pick a cylindrical work piece and place it in the appropriate position in a flexible manufacturing cell. Pneumatic actuator is used for power generation ...
Design and analysis of filament wound composite tubes
Balya, Bora; Parnas, Kemal Levend; Department of Mechanical Engineering (2004)
This thesis is for the investigation of the design and analysis processes of filament wound composite tubes under combined loading. The problem is studied by using a computational tool based on the Finite Element Method (FEM). Filament wound tubes are modeled as multi layered orthotropic tubes. Several analyses are performed on layered orthotropic tubes by using FEM. Results of the FEM are examined in order to investigate characteristics of filament wound tubes under different combined loading conditions. W...
Development of a scada control system for a weighing and bagging machine
Aykaç, Emel Sinem; Balkan, Raif Tuna; Department of Mechanical Engineering (2010)
In this thesis study, a prototype is designed in order to improve the weighing accuracy of the weighing and packaging machine that used in sugar factories. The unavoidable factory conditions cause weighing and packaging machine to do weighing errors. In order to correct these errors, the prototype produced in this study was designed as a quality control unit which will take the excess sugar and fill the deficient sugar in the sacks. Because of being small and having an easy installation, the application of ...
Assessment of sheet metal forming processes by numerical experiments
Önder, İ. Erkan; Tekkaya, A. Erman; Department of Mechanical Engineering (2005)
Sheet metal forming technologies are challenged especially by the improvements in the automotive industry in the last decades. To fulfill the customer expectations, safety requirements and market competitions, new production technologies have been implemented. This study focuses on the assessment of conventional and new sheet metal forming technologies by performing a systematic analysis. A geometry spectrum consisting of six different circular, elliptic, quad cross-sections are selected for the assessment ...
Mechanical characterization and modelling of porous polymeric materials manufactured by selective laser sintering
Tekin, Cevdet Murat; Dağ, Serkan; Department of Mechanical Engineering (2009)
Rapid prototyping methods embrace a family of manufacturing methods that are developed to speed up the prototyping stage of product design. The sole needed input for production being the solid model of the part, mold/tool-free production characteristics and the geometric part complexity that can be achieved due to layer-by-layer production have extended the applicability/research areas of these methods beyond prototyping. Local pore formation in part that occurs as a result of the discrete manufacturing nat...
Citation Formats
B. Aygün, “Conceptual design and analysis of an industrial type vacuum sweeper,” M.S. - Master of Science, Middle East Technical University, 2009.
METU IIS - Integrated Information Service open@metu.edu.tr