Development of a uniaxial shaking table and a data acquisition system

Korucu, Aytaç


Development of a portable bioagent detection and early warning system
Öktem, Hüseyin Avni (2012-09-23)
Development of a distrubuted shop floor control systems
Tengirşenk, Barış; Kılıç, S.Engin; Department of Mechanical Engineering (1999)
Development of a scada control system for a weighing and bagging machine
Aykaç, Emel Sinem; Balkan, Raif Tuna; Department of Mechanical Engineering (2010)
In this thesis study, a prototype is designed in order to improve the weighing accuracy of the weighing and packaging machine that used in sugar factories. The unavoidable factory conditions cause weighing and packaging machine to do weighing errors. In order to correct these errors, the prototype produced in this study was designed as a quality control unit which will take the excess sugar and fill the deficient sugar in the sacks. Because of being small and having an easy installation, the application of ...
Development of a scintillation gamma-ray spectrometer
Akış, M. Cengiz; Özsan, F.Esen; Department of Nuclear Engineering (1989)
Development of a miniaturized automated production control system
Korkmaz, Özgür; Kılıç, S. Engin; Department of Mechanical Engineering (2012)
In this thesis a custom embedded system and control software developed for an Automated Storage and Retrieval System (AS/RS) which is based on the Computer Integrated Manufacturing Laboratory (CIMLAB) located in the Department of Mechanical Engineering, Middle East Technical University. Primary objective of this study is AS/RSs related control rules can be applicable to the current physical system. The secondary objective is determined as developing the control system in a flexible way that allows adding ne...
Citation Formats
A. Korucu, “Development of a uniaxial shaking table and a data acquisition system,” Middle East Technical University, 1999.