Effect of austempering parameters on the mechanical charecteristics of ductile cast iron

Download
1999
Coşkun, Ahmet

Suggestions

Effect of metallurgical factors on efficiency of aluminum-zinc-indium sacrificial anodes
Safaei, Shahrokh; Doruk, Mustafa; Department of Metallurgical Engineering (1993)
Effect of batch composition on the morphology of MFI films synthesized in a continuous system
Çulfaz Emecen, Pınar Zeynep; Çulfaz, Ali; Kalıpçılar, Halil (2006-01-11)
Effect of Defect Size on the Failure of L Shaped Composite Joints
Uyar, Imren; Tasdemir, Burcu; Denizhan, Yavas; Çöker, Demirkan (2016-06-03)
Effect of isolator and ground motion characteristics on the performance of seismic-isolated bridges
Dicleli, Murat (Wiley, 2006-02-01)
This paper presents the effect of isolator and substructure properties as well as the frequency characteristics and intensity of the ground motion on the performance of seismic-isolated bridges (SIBs) and examines some critical design clauses in the AASHTO Guide Specification for Seismic Isolation Design. For this purpose, a parametric study, involving more than 800 non-linear time history analyses of simplified structural models representative of typical SIBs, is conducted. The results from the parametric ...
Effect of hydraulic parameters on the formation of vortices at intake structures
Baykara, Ali; Göğüş, Mustafa; Köken, Mete; Department of Civil Engineering (2013)
The aim of this experimental study was to investigate the hydraulic conditions at which air-entraining vortices would form in front of horizontal intakes and to determine the ways of eliminating the formation of these vortices by testing anti-vortex devices. For these reasons, a series of experiments were conducted in an experimental setup composed of a reservoir having the dimensions of 3.10 m x 3.10 m x 2.20 m and a pump connected to the intake pipe. Within the reservoir, between the concrete side walls a...
Citation Formats
A. Coşkun, “Effect of austempering parameters on the mechanical charecteristics of ductile cast iron,” Middle East Technical University, 1999.