Interior partitions and evaluating of their performance

Ünver, Deniz


Interior noise analysis of a rotary wing aircraft by hybrid statistical energy and finite element analysis
Kanlıoğlu, Recep Hilmi; Çalışkan, Mehmet; Department of Mechanical Engineering (2018)
Prediction of interior noise level within a helicopter fuselage is an important design aspect considering competition in the aviation global market combined with customer's comfort expectations. Especially, in the development phase of a new product, accurate vibro-acoustic models are required to give an engineering assessment to guide the design. The objective of this study is to review noise-generating mechanism on helicopters and vibro-acoustic analysis techniques, and to build two different predictive St...
Surface Micromachining Implementation of S-Band 4-bit Phase Shifter
Tokgöz, K.k.; Demir, Şimşek; Akın, Tayfun (2012-07-02)
Indoor localization and tracking based on RSSI and accelerometer measurements
Doğan, Melih; Yılmaz, Ali Özgür; Orguner, Umut; Department of Electrical and Electronics Engineering (2015)
In this study, first, received signal strength (RSS) based indoor localization and tracking techniques including maximum likelihood estimation (MLE), Kalman Filter (KF), serial and parallel extended Kalman Filter (EKF) are investigated and their performances compared to each other via a simulation study. Later, sensor fusion with RSS and inertial measurement unit (IMU) for target tracking is discussed to improve accuracy of RSS-based tracking by using KF and EKF as fusion algorithms. Effects of channel para...
Mechanical fatique and life estimation analysis of printed circuit board components
Genç, Cem; Ünlüsoy, Yavuz Samim; Department of Mechanical Engineering (2006)
In this thesis, vibration induced fatigue life analysis of axial leaded Tantalum & Aluminum capacitors, PDIP and SM capacitors mounted on the printed circuit boards are performed. This approach requires the finite element model, material properties and dynamic characteristics of the PCB. The young modulus of the PCB material is obtained from 3 point bending tests, resonance frequencies are obtained from modal tests and transmissibility’s of the PCB are obtained from transmissibility tests which are used as ...
Interior design : a historical and theoretical survey and a proposal for a restaurant-bar interior
Toma, Natali; Kural, İlhan; Department of Architecture (1996)
Citation Formats
D. Ünver, “Interior partitions and evaluating of their performance,” Middle East Technical University, 1990.