Coatings of hydroxyapatite - nanosize alpha alumina composites on Ti-6Al-4V

Download

index.pdf

Date

2005-12-01

Author

Evis, Zafer

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

125
views

200
downloads

Composites of hydroxyapatite (HA) and nanosize-alpha-(alpha)-Al2O3 with 5 wt.% CaF2 were coated on Ti-6Al-4V rods by cold pressing and sintered in air or argon atmosphere at 1100 degrees C to improve the bonding between the metal and the ceramic. 25 and 40 wt.% alpha-Al2O3-5 wt.% CaF2-HA composites gave the best results of strong bonding. 25 wt.% alpha-Al2O3-5 wt.% CaF2-HA and Ti-6Al-4V showed the same thermal expansion coefficients. The thermal expansion coefficient of the 40 wt.% alpha-Al2O3-5 wt.% CaF2-HA composite was slightly smaller than that of Ti-6Al-4V, which created a compressive stress on the coating, resulting in improved bonding between the metal and the ceramic.

Subject Keywords

Mechanical Engineering, General Materials Science, Mechanics of Materials, Condensed Matter Physics

URI

https://hdl.handle.net/11511/46129

Journal

MATERIALS LETTERS

DOI

https://doi.org/10.1016/j.matlet.2005.07.020

Collections

Department of Engineering Sciences, Article

Suggestions

OpenMETU
Core

Conducting polymers of decanedioic acid bis-(4-pyrrol-1-yl-phenyl) ester Çırpan, Ali; Toppare, Levent Kamil (Elsevier BV, 2004-05-15) A dipyrrolyl monomer was synthesized via the reaction between 4-pyrrol-1-yl phenol and decanedioyl dichloride. The electrochemical behavior of this monomer was studied. Polymerization of decanedioic acid bis-(4-pyrrol-1-yi-phenyl) ester (DAPE) was achieved by chemical and constant current electrolyses methods. Copolymerization of DAPE with thiophene was performed by constant potential electrolysis in acetonitrile-tetrabutylammonium tetrafluoroborate (TBAFB), dichloromethane-TBAFB, solvent-electrolyte couple...
Construction of electrochromic devices using thiophene based conducting polymers COSKUN, YENER; Çırpan, Ali; Toppare, Levent Kamil (Springer Science and Business Media LLC, 2007-01-01) Dual type polymer electrochromic devices (ECDs) based on poly(terepthalic acid bis-(2-thiophen-3-yl-ethyl)ester) (PTATE), its copolymer with thiophene P(TATE-co-Th) and poly(3,4-ethylenedioxythiophene) (PEDOT) have been constructed. Spectroelectrochemistry, switching ability and stability of the devices were investigated by UV-Vis Spectrophotometer and Cyclic voltammetry. These devices exhibit low switching voltages (between 0.0 V and +1.6 V), short switching times with reasonable switching stability under ...
DOPING AND BAND-GAP ENGINEERING OF AN INTRAZEOLITE TUNGSTEN(VI) OXIDE SUPRALATTICE OZIN, GA; MALEK, A; PROKOPOWICZ, R; MACDONALD, PM; Özkar, Saim; MOLLER, K; BEIN, T (1991-01-01) New results are presented concerning the topotactic self-assembly, n-type doping and band-gap engineering of an intrazeolite tungsten(VI) oxide supralattice n(WO3)-Na56Y, where O < n ≤ 32, built-up of single size and shape (WO3)2 dimers. In particular it has been found that the oxygen content of these dimers can be quantitatively adjusted by means of a thermal vacuum induced reversible reductive-elimination oxidative-addition of dioxygen. This provides access to new n(WO3−x)−Na56Y materials (0 < x ≤ 1.0) in...
Thermoluminescence characterization of (Ga2Se3)(0.25) - (Ga2S3)(0.75) single crystal compounds Isik, M.; Guler, I; Hasanlı, Nızamı (Elsevier BV, 2020-03-15) Ga2Se3 and Ga2S3 compounds take attention due to their potential applications in photovoltaics. Defects and impurities may affect the quality of optoelectronic devices. Therefore, it is worthwhile to determine the parameters (activation energy, order of kinetics, frequency factor) of traps associated with the defects and/or impurities. The aim of the present paper is to investigate the trapping parameters of (Ga2Se3)(0.25) - (Ga2S3)(0.75) single crystal which is one of the member of (Ga2Se3)(x) - (Ga2S3)(1-...
Mechanical behaviour of Al2O3-ZrO2 minicomposite reinforced glass matrix optomechanical composite Dericioğlu, Arcan Fehmi (Informa UK Limited, 2003-08-01) To understand the effect of a 'mesh-structured reinforcement' on the optical and mechanical properties of optomechanical composites, a unidirectional Al2O3 fibre-ZrO2 matrix minicomposite reinforced glass matrix optomechanical composite has been fabricated. By regular alignment of the minicomposites in the glass matrix as part of the 'mesh structure' a high degree of optical transparency is obtained in the composite; this transparency is proportional to its 'optical window' regions. The mesh structured rein...

Citation Formats

Z. Evis, “Coatings of hydroxyapatite - nanosize alpha alumina composites on Ti-6Al-4V,” MATERIALS LETTERS, pp. 3824–3827, 2005, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/46129.