Volume combustion and mechanochemical syntheses of LaB6

2017-01-01
Akgun, Baris
Sevinc, Naci
ÇAMURLU, HASAN ERDEM
Topkaya, Yavuz Ali
Show full item record
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
27
views
0
downloads
LaB6 powder was produced by volume combustion synthesis (VCS) and mechanochemical synthesis (MCS) methods, through magnesiothermic reduction of La2O3 and B2O3 powders. VCS was achieved by rapid heating of the reactant mixture in argon, whereas MCS was performed via high energy ball milling. All the products were subjected to XRD, SEM, gravimetric and particle size distribution analyses. MCS resulted in the expected products LaB6 and MgO. In addition to these, VCS products contained LaBO3 and Mg3B2O6. In order to obtain pure LaB6, 30 min leach in 1 M HCl was found to be enough for MCS products, whereas Mg3B2O6 could not be removed from the VCS products even after 15 h leach. Wet milling of VCS products before leach facilitated obtaining of pure LaB6. Average particle sizes of the LaB6 powder produced by VCS and MCS were 290 and 180 nm, respectively.
Lanthanum Hexaboride, Lab6, Mechanochemical Synthesis, MCS, Volume Combustion Synthesis, Magnesiothermic Reduction
https://hdl.handle.net/11511/48221
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY
Department of Metallurgical and Materials Engineering, Article

Suggestions

Formation of TiB2 by volume combustion and mechanochemical process
Bilgi, Eda; ÇAMURLU, HASAN ERDEM; Akgun, Baris; Topkaya, Yavuz Ali; SEVİNÇ, NACİ (Elsevier BV, 2008-04-01)
Titanium diboride was produced both by volume combustion synthesis (VCS) and by mechanochemical synthesis (MCP) through the reaction of TiO2, B2O3 and Mg. VCS products, expected to be composed of TiB2 and MgO, were found to contain also side products such as Mg2TiO4, Mg3B2O6, MgB2 and TiN. HCl leaching was applied to the reaction products with the objective of removing MgO and the side products. Formation of TiN could be prevented by conducting the VCS under an argon atmosphere. Mg2TiO4 did not form when 40...
Synthesis, characterizations and investigation of thermoluminescence properties of strontium pyrophosphate doped with metals
Ilkay, L. S.; ÖZBAYOĞLU, GÜLHAN; Yılmaz, Ayşen (2014-11-01)
Strontium pyrophosphate, Sr2P2O7, was synthesized by solid-state synthesis method; the product was co-doped with copper-silver (Cu-Ag), copper-indium (Cu-In) and manganese-praseodymium (Mn-Pr) oxides (CuO, MnO, In2O3, Pr6O11 and AgNO3) by solid-state reaction method. The variation of dopant concentrations was investigated from 0.5 to 15% by weight. In addition to these processes, chemical characterizations of samples and the investigation of thermoluminescence (TLD) properties of strontium pyrophosphate wit...
DRIFT studies for the reaction and adsorption of alcohols and isobutylene on acidic resin catalysts and the mechanism of ETBE and MTBE synthesis
Doğu, Timur; Aydin, E; Oktar, N; Murtezaoglu, K; Dogu, G (2001-11-14)
Diffuse reflectance FT-IR spectra of methanol and ethanol on Amberlyst 15 and on a synthesized acidic resin catalyst indicate that alcohol molecules are adsorbed by forming hydrogen bridges with the -SO3H sites of the catalyst and among themselves. Some of the alcohol molecules were found to be strongly chemisorbed by dissociation of one or two hydrogen atoms. Isobutylene was also found to be strongly adsorbed by forming a bridged structure between the adsorbed alcohol molecules and the -SO3H groups. DRIFT ...
Copolymerization of carbon disulfide, carbon dioxide and other carbonic acid derivatives with cyclic ethers by using metal xanthate catalysts
Öztürk, Elif; Alyürük, Kemal; Department of Polymer Science and Technology (2006)
The synthesis of high molecular weight copolymer of carbon disulphide (CS2) and propylene oxide (PO) has not reported in literature. In the present work, zinc isopropyl xanthate (Zn(Xt)2) was used as catalyst for the copolymerisation of PO and CS2 into high copolymer. However, the product can be fractionated into high and low molecular weight components. High molecular weight copolymer was rubbery products, but low molecular weight copolymers were oily products containing cyclic dithiocarbonates. Copolymers...
Direct hydrothermal synthesis of palladium-incorporated silicate-structured mesoporous catalysts
Sener, Canan; Doğu, Timur; Dogu, Guelsen (2007-01-01)
Pd-Si-structured novel mesoporous nanocomposite catalytic materials, having quite high Pd/Si ratios, were synthesized by an acidic direct hydrothermal synthesis route. The nanocomposite catalytic materials were then characterized by XRD, XPS, EDS, nitrogen adsorption, and SEM techniques. Unlike MCM-41, the XRD patterns indicated a rather wide d((100)) band at a 2 theta value of about 1.9. The materials, with very high Pd/Si wt ratios between 1.43 and 2.66, were synthesized and had BJH surface area values be...
Citation Formats
B. Akgun, N. Sevinc, H. E. ÇAMURLU, and Y. A. Topkaya, “Volume combustion and mechanochemical syntheses of LaB6,” INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, pp. 331–339, 2017, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/48221.
METU IIS - Integrated Information Service open@metu.edu.tr