The construction of state models for RLC networks from the state model terminal equations of their subaaemblies.

1973
Kutlucan, Erdem

Suggestions

The design and construction of a conjugate-impedance network analyser.
Sofuoğlu, Atalay; Department of Electrical Engineering (1967)
THE CALCULATION OF THE TRANSITION FORM-FACTOR D+-]KBAR0E+NU-E AND THE KOBAYASHI-MASKAWA MATRIX ELEMENT UCS
Alıyev, Tahmasıb; KOGAN, YI (1984-01-01)
The analysis of torsional and bending stresses in continuous bridges with thin-walled open cross-sections.
Çalkıvik, Gürhan; Department of Civil Engineering (1970)
The numerical inversion of laplace transform with the applications to dynamic response of elastic rods.
Canat, Ahsen; Department of Engineering Sciences (1975)
The Development and Performance Characterization of Turbine Prototypes for a MEMS Spirometer
GOREKE, Utku; HABİBİABAD, Sahar; Azgın, Kıvanç; Serinağaoğlu Doğrusöz, Yeşim; Beyaz, Mustafa Ilker (2016-02-01)
The design, optimization, and performance characterization of turbine prototypes for the development of a Microelectromechanical Systems spirometer is reported. Four different turbines were designed based on large-scale Savonius turbine architecture. The number of turbine blades was optimized through finite-element simulations to maximize the induced moment and rotational speed at normal breathing flow rates. The turbines were manufactured and tested for their speed performance with respect to input flow ra...
Citation Formats
E. Kutlucan, “The construction of state models for RLC networks from the state model terminal equations of their subaaemblies.,” Middle East Technical University, 1973.