Experimental investigation of the rotary table feeder.

1984
Özcan, Namık
Show full item record
53
views
0
downloads
https://hdl.handle.net/11511/5546
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Experimental investigation on sharp-crested rectangular weirs
Gharahjeh, Siamak; Aydın, İsmail; Altan Sakarya, Ayşe Burcu; Department of Civil Engineering (2012)
This study is an experimental research to formulate the discharge over sharp-crested rectangular weirs. Firstly, a series of measurements on different weir heights were conducted to find the minimum weir height for which channel bed friction has no effect on discharge capacity. After determining the appropriate weir height, weir width was reduced to collect data on discharge-water head over weir relationship for a variety of different weir openings. Then, the data was analyzed through regression analysis al...
Experimental investigation of the effect of bends on the forced convection heat transfer in pipes.
Özgü, Mustafa Ragıp; Department of Mechanical Engineering (1968)
Experimental investigation of the effect of steam-solvent injection on heavy oil recovery
Akartuna, Şevket Ersin; Bağcı, A. Suat; Department of Petroleum Engineering (1990)
Experimental Investigation of New Indices of Broken Rotor Bar in Induction Motor
Oumaamar, M. E. K.; Razik, H.; Rezzoug, A.; Chemali, H.; Khezzar, A. (2011-09-10)
Most of rotor related faults in three-phase induction motors are due to broken rotor bars and end-ring defects. Nowadays Inductions motors are more frequently used with inverters which make the diagnosis process more complicated. Furthermore, some manufacturers of induction machines mount converters (i.e. rectifier and inverter) directly onto the machine, which makes the stator current unattainable for diagnosis. In order to overcome these drawbacks, the authors propose to analyze new motor fault signatures...
Experimental Investigation of a Slug Motion in an Inclined Pipe System
Dinçer, Ali Ersin; Bozkuş, Zafer (null; 2018-09-14)
Liquid slugs trapped in a voided line may damage the pipe systems used in thermal power plants. Problems in those plants have been reported in the literature. In order to prevent the failures of the pipes, the impact pressures due to slugs should be predicted as accurately as possible. In the present study, slug motion is experimentally investigated. Experiments are conducted to measure impact force due to slug flow for a larger pipe diameter which represent the real piping systems better. An inclined...
Citation Formats
N. Özcan, “Experimental investigation of the rotary table feeder.,” Middle East Technical University, 1984.
METU IIS - Integrated Information Service open@metu.edu.tr