Experimental investigation of the effect of bends on the forced convection heat transfer in pipes.

Date

1968

Author

Özgü, Mustafa Ragıp

Metadata

Show full item record

Item Usage Stats

74
views

0
downloads

URI

https://hdl.handle.net/11511/7540

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Experimental Investigation of the Effect of Temperature on Friction Pressure Loss of Polymeric Drilling Fluid Through Vertical Concentric Annulus Gürçay, Kazım Onur; Akın, Serhat; Gucuyener, Hakkı (null; 2019-02-14) Accurate estimation of annular friction pressure loss is necessary to perform drilling and well completion operations without lostcirculation, pipe sticking or more serious well control problems. Determination of friction pressure loss for Newtonian and non-Newtonianfluids has been investigated in several experimental and theoretical works by considering the effects of eccentricity, pipe rotation or pipegeometry. However, there is a gap in the studies about the temperature effect that is important especiall...
Experimental investigation of the effect of temperature on friction pressure loss of polymeric drilling fluid through vertical concentric annulus Gürçay, Kazım Onur; Akın, Serhat; Gücüyener, İsmail Hakkı; Department of Petroleum and Natural Gas Engineering (2018) Accurate estimation of friction pressure loss through annulus is important to avoid lost circulation, pipe sticking, kicks or more serious problems in drilling and well completion operations. Several studies have been performed to determine friction pressure loss experimentally and theoretically through pipe and annulus with the effects of eccentricity, pipe rotation, annulus geometry or flow regime by applying several rheological models. However, in addition to all of these factors, fluid rheology is depen...
Experimental investigation of residual stresses introduced via shot peening and their effect on fatigue life of ball bearings Küçükyılmaz, Ali; Gür, Cemil Hakan; Department of Metallurgical and Materials Engineering (2010) In this study, residual stresses introduced via application of shot peening on the raceways of bearing rings and their effect on the fatigue life was investigated experimentally. For improvement of residual compressive stress state, shot peening operation with different parameters was utilized. Residual stress measurements were conducted via X-ray diffraction technique. Optimization of residual stress state during the production of ball bearings is the main target of this study. Process parameters for shot ...
Experimental investigation of the effect of steam-solvent injection on heavy oil recovery Akartuna, Şevket Ersin; Bağcı, A. Suat; Department of Petroleum Engineering (1990)
Experimental investigation for mechanical properties of filament wound composite tubes Erdiller, Emrah Salim; Parnas, Kemal Levend; Department of Mechanical Engineering (2004)

Citation Formats

M. R. Özgü, “Experimental investigation of the effect of bends on the forced convection heat transfer in pipes.,” Middle East Technical University, 1968.