Extraction of some transition metals with N,N-dibutyl-N '-benzoylthiourea into molten paraffin at 65 degrees C

Date

2000-10-02

Author

Merdivan, M
Gungor, A
Savasci, S
Aygün, Rüveyde Sezer

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

187
views

0
downloads

The solid-liquid extraction behaviour of some transition metals (Cu(II), Co(II), Ni(II), Cd(II) and Pb(II)) by the use of N,N-dibutyl-N'-benzoylthiourea as an extractant in paraffin (58-60 degrees C) has been investigated at 65.0 +/- 0.5 degrees C. The effect of equilibration time, pH of the aqueous phase, concentration of extractant and solid solvent used on the extraction efficiency of these metals have been discussed. The interferences of various ions are examined. The method has been applied to the determination of these metals in synthetic samples, mushrooms and sediment.

Subject Keywords

Transition metals, Paraffin, Extraction, N,N-dibutyl-N '-benzoylthiourea

URI

https://hdl.handle.net/11511/56910

Journal

TALANTA

DOI

https://doi.org/10.1016/s0039-9140(00)00464-1

Collections

Department of Chemistry, Article

Suggestions

OpenMETU
Core

Preparation of lead zirconate titanate (Pb(Zr0.52Ti0.48)O-3) by homogeneous precipitation and calcination Oren, EE; Tas, AC (1998-05-06) Aqueous solutions of lead chloride (PbCl2), zirconium oxychloride (ZrOCl2.8H(2)O) and titanium tetrachloride (TiCl4), in appropriate volumetric amounts, were used as the starting materials in the synthesis of phase-pure Pb(Zr0.52Ti0.48)O-3 powders. Preparation of the phase-pure PZT powders were achieved, in the presence of urea (CH4N2O), by the chemical powder synthesis route of homogeneous precipitation.
Preparation and microstructure of sol-gel derived silver-doped silica Akkopru, Betul; Durucan, Caner (2007-08-01) Silver-doped silica was prepared by hydrolysis and condensation of tetraethyl orthosilicate (TEOS, Si(OC2H5)(4)) in the presence of a silver nitrate (AgNO3) solution by two different synthesis methods. In the first synthesis route, sol-gel mixtures were prepared using an acid catalyst. In the second synthesis route, silver-doped silica gels were formed by two-step acid/base catalysis. For the same concentration of silver dopant [AgNO3]/[TEOS] = 0.015 acid-catalyzed sol-gel formed a microporous silica with a...
Synthesis and characterization of poly(dibromophenylene oxide)s through thermal decomposition of various transition metal complexes in solid state. Şanlı, Pınar; Kısakürek, Duygu; Aras, Leyla; Department of Chemistry (2002) In this study, synthesis and characterization of poly(dibromophenylene oxide)s though thermal decomposition of bis(2,4,6-tribromophenolato)di(N- methyl imidazole) Cu(II), bis(2,4,6-tribromophenolato)di(N-methyl illimidazole)Co(II) and bis(2,4,6-tribromophenolato)di(N-methyl imidazole)Ni(II) complexes in solid state was examined. For the characterization of complexes FTIR, DSC, mass spectroscopy, magnetic susceptibility and C, H,N elemental analysis were performed. Syntheses of the polymer were achieved by t...
Isolation of volatile oil from thyme (Thymbra spicata) by steam distillation Hanci, SS; Şahin, Serpil; Yılmaz, Levent (2003-08-01) The effects of steam flow rate (1.03 and 0.64 L/h), distillation time, and particle size (0.50, 1.00, 2.05 mm) of Thymbra spicata on essential oil yield and sequence of extraction of compounds were studied. A logarithmic model fitted well to experimental data. The composition of the essential oil obtained by steam distillation was investigated for whole leaves only since the grinding had an adverse effect on yield. The oil obtained was very rich with respect to its carvacrol content. For both steam flow rat...
Preparation of PLZT thin films by chemical solution deposition and their characterization Kaplan, Burkan; Özenbaş, Ahmet Macit; Department of Metallurgical and Materials Engineering (2005) In this study, La3+ was substituted into lead zirconate titanate (PZT) system by Pb1-xLax(ZryTi1-y)1-x/4O3 nominal stochiometry and it was processed via chemical solution deposition on (111)-Pt/Ti/SiO2/Si-(100) substrate.PLZT solutions were prepared by mixing two solutions, one of which was obtained by dissolving lead acetate and lanthanum acetate hydrate in 2 methoxyethanol at high temperature. This solution was then mixed with the second solution containing zirconium propoxide and titanium isopropoxide. 4...

Citation Formats

M. Merdivan, A. Gungor, S. Savasci, and R. S. Aygün, “Extraction of some transition metals with N,N-dibutyl-N ’-benzoylthiourea into molten paraffin at 65 degrees C,” TALANTA, pp. 141–146, 2000, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/56910.