On the counter stabilized oscillators.

1979
Sezen, Murat

Suggestions

On the frequency domain LMS adaptive line enhancer
Koşaroğlu, Mustafa; Tanık, Yalçın; Department of Electrical and Electronics Engineering (1989)
On the linearly hardening rotating solid shaft
Eraslan, Ahmet Nedim (2003-03-01)
Analytical solutions are obtained for elastic-plastic deformations of a linearly hardening rotating solid shaft with fixed ends and with free ends. All stages of elastic-plastic deformations are studied using Tresca's yield condition and the flow rule associated with it. Expressions for the stresses, displacement and plastic strains for a perfectly plastic shaft can be deduced from the expressions of linearly hardening shaft by letting the hardening parameter vanish. (C) 2002 Editions scientifiques et medic...
On parallelized serially concatenated codes
GAZİ, ORHAN; Yılmaz, Ayşen (2007-03-15)
Serial concatenated codes show very good performance at low signal to noise ratios. However, large decoding delays due to long input frame lengths constitute a major disadvantage for these type of codes. In this study we introduce a new class of concatenated convolutional codes which are very suitable for parallel decoding, thus have much less decoding delays and also show comparable performance to that of classical serial concatenated convolutional codes. The analytical upper bound expressions for performa...
On Orbit Modulation Transfer Function Estimation for BILSAT Imagers
Leloğlu, Uğur Murat (null; 2006-07-06)
BiLSAT, launched to its sun-synchronous orbit on 27.09.2003, is a 129 Kg small satellite carrying a panchromatic camera and a 4band multispectral camera with Ground Sampling Distances (GSD) 12.6 m and 28 m, respectively. The multispectral camera is composed of 4 totally independent cameras. All five refractive optic cameras have 2048 by 2048 frame CCDs as sensors. The overall Modulation Transfer Functions (MTF) of the imaging systems are very important for characterization of imagers. In this study, the MTF...
On the elastic-plastic shrink fit with supercritical interference
Gamer, U; Müftü, Sinan (Wiley, 1990)
Shrink fits with perfectly elastic-plastic hub material cannot be treated with the help of Tresca's yield criterion, if the ratio of outer and inner diameter as well as the interference exceed certain limits. For linear hardening material, however, a solution exists for all radii ratios. It is shown that, for small hardening, the material in the neighbourhood of the interface undergoes a twofold change of the yield condition.
Citation Formats
M. Sezen, “On the counter stabilized oscillators.,” Middle East Technical University, 1979.