Modelling and casecade control of water temperature in a fluidized bed lignite combustor.

1980
Kitapçı, Aysun
Show full item record
61
views
0
downloads
https://hdl.handle.net/11511/6541
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Modelling and optimization of a rotary regenerative type waste-heat exchanger.
Sönmez, Murat; Department of Mechanical Engineering (1986)
Modelling and transient analysis of a hybrid liquid desiccant cooling system
Karshenass, Arash; Yamalı, Cemal; Baker, Derek Keıth; Department of Mechanical Engineering (2014)
Desiccant Cooling Systems (DCS) are considered as an alternative method for conventional vapor compression cooling systems (VCCS) or at least a complimentary component to them. In conventional VCCS inlet air is cooled down to blow its dew point for dehumidification and then is reheated again to obtain air flow with desired temperature and humidity, and consequently inefficient consumption of energy. In DCS, dehumidification of air is done by utilizing of desiccant material to get desirable humidity and then...
Modelling and control of a wind energy conversion system consisting of a wind turbine and an inverter-fed induction generator.
Sarıbatır, Behçet Melih; Sezer, M. Erol; Department of Electrical and Electronics Engineering (1985)
Modelling and Simulation of Steel Heat Treatment: Prediction of Microstructure, Distortion, Residual Stresses and Cracking
Şimşir, Caner (null, 2014-01-01)
Modelling and Precalculation of Additional Losses of Inverter Fed Asynchronous Induction Machines for Traction Applications
Muellner, F.; Neudorfer, H.; Schmidt, E. (2011-09-10)
The inverter supply of asynchronous induction machines for traction applications has a major influence on both electromagnetic and thermal performance. In addition asynchronous induction machines used with traction drives of rail transportation vehicles have different design strategies compared against commonly used standard machines. Generally, the design of these machines requires high electromagnetic and thermal stress. Thus, the additional losses caused by the inverter have to be considered with the ini...
Citation Formats
A. Kitapçı, “Modelling and casecade control of water temperature in a fluidized bed lignite combustor.,” Middle East Technical University, 1980.
METU IIS - Integrated Information Service open@metu.edu.tr